NVIDIA nForce SATA hot-swap: feed up!

  • Thread starter Thread starter Zeneca
  • Start date Start date
Z

Zeneca

Mobo = A8N-E

HD = a single SATA Maxtor 160 GB with three partitions (C:, D:, E:)



The icon to remove hardware safely is on the tray from windows session
start.

I'm always afraid my family will mix up the USB memory key with the base HD,
at the time of removing the key from the PC.



I've been looking on several FAQ, forums, Asus web, but I had not luck yet
about how to change the properties of the base HD, in order to delete it
from the removal hardware list.

I know that the icon can be removed from the tool bar, but then it would
disappear for all the hardware, including the USB memory key, that might
need it for safety.



Any hint about how to fix the dilemma?



Thanks and regards.

Juan Luis
 
Zeneca said:
Mobo = A8N-E

HD = a single SATA Maxtor 160 GB with three partitions (C:, D:, E:)



The icon to remove hardware safely is on the tray from windows session
start.

I'm always afraid my family will mix up the USB memory key with the base HD,
at the time of removing the key from the PC.



I've been looking on several FAQ, forums, Asus web, but I had not luck yet
about how to change the properties of the base HD, in order to delete it
from the removal hardware list.

I know that the icon can be removed from the tool bar, but then it would
disappear for all the hardware, including the USB memory key, that might
need it for safety.
Click to expand...

It shouldn't be a problem. You can't stop a device that has open files
on it, and the Windows boot drive always will.
 
It shouldn't be a problem. You can't stop a device that has open files on
it, and the Windows boot drive always will.
Click to expand...

Ok, It shouldn't be any problem.

But is there ANY way to hiden ONLY the basic HD's from the removible
devices?

Thanks.
 
It shouldn't be a problem. You can't stop a device that has open files on
it, and the Windows boot drive always will.
Click to expand...

Ok, It shouldn't be any problem.

But is there ANY way to hiden ONLY the basic HD's from the removible
devices?

Thanks.
 
It shouldn't be a problem. You can't stop a device that has open files on
it, and the Windows boot drive always will.
Click to expand...

Ok, It shouldn't be any problem.

But is there ANY way to hiden ONLY the basic HD's from the removible
devices?

Thanks.
 
Ok, It shouldn't be any problem.

But is there ANY way to hiden ONLY the basic HD's from the removible
devices?

Thanks.
Click to expand...
If someone accidentally clicks the HD (and that takes two clicks,
nothing a kid would likely do by accident), what will it really hurt?
The worst that could happen is that you'd have to restart the computer
to get it detected again.

I don't think there is a way to take it off the list. In prior
operating systems, there was sometimes an option for making a drive
"removable." I don't find that in XP, at least not while using the
nVidia IDE drivers.

Ron
 
If someone accidentally clicks the HD (and that takes two clicks,
nothing a kid would likely do by accident), what will it really hurt?
Click to expand...

Considering I've working a pair of HD's as Raid-0, on the worts case and due
to the shutdown I can lost all the data, but nothing else.
The worst that could happen is that you'd have to restart the computer
to get it detected again.

I don't think there is a way to take it off the list. In prior
operating systems, there was sometimes an option for making a drive
"removable." I don't find that in XP, at least not while using the
nVidia IDE drivers.
Click to expand...

That's the point: this feature depends from nVidia drivers and not from Xp.
This possibility of disconnecting the basic HD's should be considered when
designing the drivers, on my opinion.
Ron
Click to expand...

Thanks anyway.
 
If someone accidentally clicks the HD (and that takes two clicks,
nothing a kid would likely do by accident), what will it really hurt?
Click to expand...

Considering I've working a pair of HD's as Raid-0, on the worts case and due
to the shutdown I can lost all the data, but nothing else.
The worst that could happen is that you'd have to restart the computer
to get it detected again.

I don't think there is a way to take it off the list. In prior
operating systems, there was sometimes an option for making a drive
"removable." I don't find that in XP, at least not while using the
nVidia IDE drivers.
Click to expand...

That's the point: this feature depends from nVidia drivers and not from Xp.
This possibility of disconnecting the basic HD's should be considered when
designing the drivers, on my opinion.
Ron
Click to expand...

Thanks anyway.
 
Considering I've working a pair of HD's as Raid-0, on the worts case and due
to the shutdown I can lost all the data, but nothing else.
Click to expand...

Why do you think you'd lose all your data?
That's the point: this feature depends from nVidia drivers and not from Xp.
This possibility of disconnecting the basic HD's should be considered when
designing the drivers, on my opinion.


Thanks anyway.
Click to expand...

Ron
 
milleron said:
Why do you think you'd lose all your data
Click to expand...

On the case that the "logic disconnection" is produced, the OS would be
always working.
I'm not confident this connection cut, can't affect the Raid-0 consistency.
 
On the case that the "logic disconnection" is produced, the OS would be
always working.
I'm not confident this connection cut, can't affect the Raid-0 consistency.
Click to expand...

The OS would still "be working," but it could not possibly make any
further changes to the %WINDIR% or anything else on that disk. I'm
not an authority on the subject, but I can't see how data would be
lost. The tray applet makes sure that any cached writes are finished
before it allows you to "safely disconnect" the device.

Now, don't get me wrong. I'd like to get the hard drives off the
list, too. I'm just saying that I don't think their presence on the
list poses a grave danger. I think that, at worst, it could lead to
inconvenience.


Ron
 
milleron said:
The OS would still "be working," but it could not possibly make any
further changes to the %WINDIR% or anything else on that disk. I'm
not an authority on the subject, but I can't see how data would be
lost. The tray applet makes sure that any cached writes are finished
before it allows you to "safely disconnect" the device.
Click to expand...

It also requires that no files be open on the drive. On the Windows boot
volume this is impossible to achieve, so it will not allow you to stop
the device. Try it and see..
 
It also requires that no files be open on the drive. On the Windows boot
volume this is impossible to achieve, so it will not allow you to stop
the device. Try it and see..
Click to expand...

Ha-ha. I truly suspected that it wouldn't let me disconnect a system
drive, but I did not -- and do not -- want to do the experiment. I'm
happy to take your word on it, Robert. Thanks.


Ron
 
Back
Top