Nvidia GeForce 6100

  • Thread starter Thread starter Denise
  • Start date Start date
D

Denise

I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is running
great EXCEPT my screen flickers now. I download the updated drivers from
Nvidia, didn't help, went to the Vista website found a help file for screen
flickering, says to change the refresh rate, ok, I did that. BUT my screen
still flickers! Microsoft on their help chat line says I need more ram.
Besides upgrading my video card does anyone here have any idea what I can do
to fix this??

Thanks in advance for your help!
Denise
 
How much memory does your 6100 card have?
How much main memory does your system have?
What resolution are you using over what display interface to your monitor?
 
OK, Display settings for GeForce 6100 say:

Total Available graphics memory 399 MB
Dedicated Video Memory 128 MB

System is:
AMD Athlon 64 X2 dual-core processor 4200
2.2 GB
2000 MHz front side bus
L2 cache: 512 KB x2
2048 MB 400 MHz (PC3200) DDR memory (four 512 MB modules)
Vista isn't seeing my Gateway Moniter which is a FPD1960, it is using a
Generic driver there (Gateway doesn't have a vista driver ready, says it's
not the moniter it's vista :) Nividia DOES see the correct moniter, it's
just vista that doesn't.

Resolution is set at 1152 by 864 (32 bit) which is where the geforce drivers
set it when they installed, I've changed it up and down, no difference.

Microsofts solution is:
Based on the information shared by us on the chat, you need to Upgrade your
RAM to 512 MB RAM

If I have too I will, but I don't want to spend the money if it's not
needed.

--
Denise

How much memory does your 6100 card have?
How much main memory does your system have?
What resolution are you using over what display interface to your monitor?
 
Are you using the a standard PC VGA interface to your monitor?
Try setting the resolution to 1024x768@60Hz
Are you running the 32bit or the 64 bit version of Vista?
Do you have latest NVIDIA 32 bit or 64 VISTA drivers (release 100.59) from
the NVIDIA Web site installed?
 
Vista only needs 128MB of graphics memory even for Aero.
You allready of have 2GB of so I don't understand MS saying you need to
upgrade to 512.
 
Yes: Are you using
the a standard PC VGA interface to your monitor?
Done, no difference on any setting! Try setting the resolution
to 1024x768@60Hz
32 bit version of Vista Are you running the
32bit or the 64 bit version of Vista?

Do you have latest NVIDIA 32 bit or 64 VISTA drivers (release 100.59) from
the NVIDIA Web site installed?

Yes downloaded the other day, redownloaded again today and reinstalled to
make sure nothing changed!

Thank you for all of your help!
Denise

Are you using the a standard PC VGA interface to your monitor?
Try setting the resolution to 1024x768@60Hz
Are you running the 32bit or the 64 bit version of Vista?
Do you have latest NVIDIA 32 bit or 64 VISTA drivers (release 100.59) from
the NVIDIA Web site installed?
 
This is the latest email from my "support" person at MS,

Based on the information shared by us on the call, you need to backup your data before we perform a "Clean installation" of "Windows Vista" - Home Edition. Please let me know once the backup is done through email.



If I have to do this then vista's not going back on this computer! LOL
--
Denise


Vista only needs 128MB of graphics memory even for Aero.
You allready of have 2GB of so I don't understand MS saying you need to
upgrade to 512.
 
Yes 6100 board was working fine until I installed Vista, then the trouble
started LOL
 
Back
Top