nv4_disp.dll problem

  • Thread starter Thread starter Teriel9
  • Start date Start date
T

Teriel9

I had a problem when nv4_disp went into a continuous loop, I downloaded and
replaced the file whch cured that fault, now I get a "paging in a non-paging
area" fault. when I replace the file and try to start windows normally the
same fault occurs.
I have scanned for viruses and found none.
While in this state I can only use 800x600 resolution.
Can anyone please help
TIA
Teriel9
 
Teriel

What version of nv4_disp.dll is presently installed? Where did you
obtain the replacement from?

What is the make and model of your graphics card?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Hi Gerry,
Many thanks for your prompt response.
nv4_disp.dll V44.03
Cannot remember where I downloaded it from, sorry
Nvidia GEForce2MX/MX400 Graphics card.
I downloaded a new driver (63mb) Version 94.24 from Nvivia site and on
trying to install got the message."Cannot find hardware suitable for this
driver"
HTH
Regards
Teriel9
 
Hi Gerry,
I downloaded that one first and when I got the wrong hardware message I
tried 44.03
Any further ideas please
Thanks
Teriel9
 
Change the Graphics card? Probably an over expensive solution!

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Thanks Gerry,
I feared that this might be the final solution, should I avoid Nvidia?
Rgds
Teriel9
 
Teriel9

I am not versed in the respective merits of suppliers of graphics cards.

What is the make and model of your motherboard?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
I have WindowsXP with SP2 and NvidiaGeForce 2 MX 400HP. My identical problem
with the continuous loop as yours started about a month ago. My event viewer
informed me to update and unfortunately the update was also unsuccessful.
I am still having the problem and at a loss on how to resolve it
 
Another thought. What happens if you roll back the driver to what is was
before the problem started?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
I have tried 3 different drivers all to no avail, can only use the computer
in 800x600 mode by replacing the nv4_disp.dll , if you wish I can send you a
copy of the dll file I am using.
The use of the computer is limited but I can do most jobs with it.
Teriel9
--
All our emails are scanned by Norton Antivirus before sending
Please advise any virus that gets through
Killian said:
I have WindowsXP with SP2 and NvidiaGeForce 2 MX 400HP. My identical
problem with the continuous loop as yours started about a month ago. My
event viewer informed me to update and unfortunately the update was also
unsuccessful.
I am still having the problem and at a loss on how to resolve it
Click to expand...
 
Another thought. What happens if you roll back the driver to what it was
before the problem started?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Teriel9

What about the original CD that came with the graphics card?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
After I had updated unsuccessfully I did roll back to the original driver
and except for the Nv continuos loop problem at start up from time to time I
have had no other problems. This problem freezes my computer at start up so
I have to switch it off with the power button and restart it. At this second
start all goes OK until the following day. A nuisance.
Thanks Teriel9.

Teriel9 said:
I have tried 3 different drivers all to no avail, can only use the
computer in 800x600 mode by replacing the nv4_disp.dll , if you wish I can
send you a copy of the dll file I am using.
The use of the computer is limited but I can do most jobs with it.
Teriel9
Click to expand...
 
Hi Gerry,
I have changed Cards to an ATI Radeon and all is well
Many thanks for your kind assistance.
Teriel9
 
Teriel9

Great. Pity we could not find a more economic solution but one needs to
move on.

--
Regards.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Hi Gerry,
I have changed Cards to an ATI Radeon and all is well
Many thanks for your kind assistance.
Teriel9
 
Teriel9

I did get your message yesterday and responded appropriately.


--
Regards.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Back
Top