No floppy drive to use with F6

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

After reviewing many posts here I'm guessing I'll have to temporarily connect
a floppy drive to to setup MCE on a new box with a RAID setup in the BIOS.
(?) I'm not finding any suggestions of putting the drivers on a CD to provide
the install routine when prompted.

Can an MVP confirm that I must use a floppy drive?

Thanks for the assist.
John
 
jmarotto said:
After reviewing many posts here I'm guessing I'll have to
temporarily connect a floppy drive to to setup MCE on a new box
with a RAID setup in the BIOS. (?) I'm not finding any suggestions
of putting the drivers on a CD to provide the install routine when
prompted.
Click to expand...

No - but you will find ways of integrating them into the installation media.
Can an MVP confirm that I must use a floppy drive?
Click to expand...

It is the easiest method. My suggestion is to purchase an inexpensive USB
floppy drive and just keep it around.
 
You don't need an MVP to confirm that, you either provide the drivers on
floppy or integrate them into a custom install CD.
 
Thanks

Shenan Stanley said:
No - but you will find ways of integrating them into the installation media.


It is the easiest method. My suggestion is to purchase an inexpensive USB
floppy drive and just keep it around.
Click to expand...
 
Back
Top