NO audio after i capture a clip!!! HELP

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,
OK this is what happens---1st i capture the video from my samsung video
camera and then i save it on my computer. Then when i get it into my
collection file on MM and press play it has NO audio? I am very confused!
 
How have you connected the camera to the pc, this is often a sign of using
usb or analogue cables, you need to use firewire (ieee1394/i-link)
 
I am using the USB cables? those are what i got with my video camera!!
SOO i should youse firewire?? NO idea what that is
 
This google picture search shows you what firewire cable and ports look
like.
http://images.google.co.uk/images?q=firewire&hl=en
Your camcorder manual should show you where the port is on the cam, it will
be a 4 pin one.
To check if the pc has one, go to
start
control panel
system
hardware
device manager
and look for ieee1394 bus host controllers.
If this is present you have it on the pc it's just a question of finding it.
 
Are you saying there is no way to capture audio using the analog L/R plugs on
the ATI XP Media edition interface?
 
ieee1394 carries the digital siganl of both video and audio, along with
various other components of information for things like controlling the
camcorder.
Analogue audio can of course be captured via the interface you mention
below, so long as you set the capture appliation to the ATI card.
 
Back
Top