Nikon's FH-2 <-> MA-21

  • Thread starter Thread starter Don
  • Start date Start date
D

Don

Can Nikon's FH-2 film strip holder be used in the MA-21 slide adapter?

(FH-2 is intended for MA-20, while FH-3 nominally requires an MA-21.)

Knowing Nikon, I strongly suspect the answer is no, but just to make
sure...

If the answer is indeed no, does FH-2 physically fit into the MA-21?

This is leading question because if it does then it's just a matter of
identifying the electrical connection and playing with it.

Don.
 
Don said:
Can Nikon's FH-2 film strip holder be used in the MA-21 slide adapter?

(FH-2 is intended for MA-20, while FH-3 nominally requires an MA-21.)

Knowing Nikon, I strongly suspect the answer is no, but just to make
sure...

If the answer is indeed no, does FH-2 physically fit into the MA-21?

This is leading question because if it does then it's just a matter of
identifying the electrical connection and playing with it.

Don.


Hello

There should be no problem, but the FH3 can be got from Amazon for very
little cost. I got one for UKP23. It should be the same in dollars.
The MA21 has no electrical connections.

Mike Engles
 
Hello

There should be no problem, but the FH3 can be got from Amazon for very
little cost. I got one for UKP23. It should be the same in dollars.
The MA21 has no electrical connections.

Hi Mike,

Thanks very much!

Kennedy also just mentioned that it can be used but it's slightly
thinner.

Don.
 
Back
Top