Nikon CoolScan II - Error About Lock-Screws

  • Thread starter Thread starter tbl
  • Start date Start date
T

tbl

At work there is a Coolscan ii hooked up to the same
computer that it was on a year ago when it worked fine.

But now NikonScan 3 (or 3.1) throws up a message saying that
the lock-screws are still in place... but they are not!

Anyone?
-- Thanks,tbl
 
tbl said:
At work there is a Coolscan ii hooked up to the same
computer that it was on a year ago when it worked fine.

But now NikonScan 3 (or 3.1) throws up a message saying that
the lock-screws are still in place... but they are not!
Click to expand...
Disconnect the scanner, undo the screws on the lid and take it off. Then
blow some clean air through the film guides and around the head track
etc. Sounds like dirt or dust has got lodged in the lock screw sensor,
which is only an opto-coupler.
 
Just a short note. This weekend, I had a problem with my Nikon LS-30. A quick search on the web found the article URL here:

www.pcreview.co.uk/forums/thread-1936922.php

The info there solved the problem! I loosened the brass screw, cleaned some lint from the screw drive, and voila!

I just wanted to say thanks!!!

NathanP
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Cleaning Nikon Coolscan II 1
WhooHoo, Nikon CoolScan slide scanner issue solved! 17
Nikon Coolscan V Refurbished 2
Nikon sacn plugin with CS 3 4
New Coolscans when? 19
How to get best results from Nikon Coolscan 5000? 1
Nikon Coolscan IV software 8
Scanning microfiche on a Nikon Coolscan 9000 ED film scanner? 1

Back
Top