newbie require help

  • Thread starter Thread starter alex
  • Start date Start date
A

alex

Hi

My problem is that when i booot my pc nothing happens the monitor remains
blank and there are no beeps from the bios. i have to restart the PC a few
times before the PC works

I was advised to check the connections which i sure are correct i was also
advise to check the jumper settings i know where they are but dont know if
they are correct can someone help me plz ? and also any other suggestions to
solve the problem

below are my stats

lex BN790TM VIA KT266
AMD ATHLOON 2000XP SOKET A 266 FSB
256 MB DDR PC2100
40GIG
64MB GEFORCE 2 MX 400
 
I m reading off the power supply here, it says

P4 Power Supply: Model ATX-7P4-3

AC Input: 115v/230v-,6A/3A,50/60Hz


DC Output: +5v, +12v, +3.3v, SB+5v, -5v, -12v,
+5v+3.3v
300w, 30A, 12A, 14A, 1A, 0.5A,
0.5A, 145Wmax
 
Alex, 145watts isn't much, try removing all components not needed for
booting such as network\modem cards, sound cards, cdrom drive, etc. and see
what happens.
 
Back
Top