Newbie Needs some advise

  • Thread starter Thread starter Chris
  • Start date Start date
C

Chris

I Upgraded my system from Windows Me to Win 2000 Pro.
The sysem boots without a problem, ask for a password and
proceeds to finish loading.

Just before full access is allowed... for some reason all
the color goes out and I can only use the system in a
black and white mode.

Can any tell me how to fix this?
 
Chris - Upgrading from ME to W2k is not only iffy but is not supported
by Microsoft - ME is actually a more recent OS than W2k.

However, maybe you've lucked out. If W2k appears to be working correctly
in all respects except the display color problem, you probably need
only to replace the driver for the video card (whether the card is a
separate item or integrated on the motherboard.) If a W2k driver for the
video component exists, the manufacturer and maybe Microsoft will have
it and you can download it. Instructions for replacing a driver are
available in various placen in W2k, including the main Help files and
Device Manager Troubleshooting files.

If you stick the W2k CD in the drive and run the following command, you
may get a hint as to the nature of your problem:
[CD]:\i386\winnt32.exe /checkupgradeonly

If and when you fix that problem, you may stumble on other more subtle
ones. Good luck, though... :-)
 
Dan

Thank you for taking the time out to help a newbe.
I'll take your suggestions and let you know how it turns
out.

Thanks again.

-----Original Message-----
Chris - Upgrading from ME to W2k is not only iffy but is not supported
by Microsoft - ME is actually a more recent OS than W2k.

However, maybe you've lucked out. If W2k appears to be working correctly
in all respects except the display color problem, you probably need
only to replace the driver for the video card (whether the card is a
separate item or integrated on the motherboard.) If a W2k driver for the
video component exists, the manufacturer and maybe Microsoft will have
it and you can download it. Instructions for replacing a driver are
available in various placen in W2k, including the main Help files and
Device Manager Troubleshooting files.

If you stick the W2k CD in the drive and run the following command, you
may get a hint as to the nature of your problem:
[CD]:\i386\winnt32.exe /checkupgradeonly

If and when you fix that problem, you may stumble on other more subtle
ones. Good luck, though... :-)
I Upgraded my system from Windows Me to Win 2000 Pro.
The sysem boots without a problem, ask for a password and
proceeds to finish loading.

Just before full access is allowed... for some reason all
the color goes out and I can only use the system in a
black and white mode.

Can any tell me how to fix this?
Click to expand...

.
Click to expand...
 
you may have an incorect driver for either your graphics
card or your monitor, of maybe have one of the settings
beyond the capabilities of the card or the monitor. most
systems "freak out" at 256 colours. try that and
hopefully it helps

Dave
 
either u got an illegal copy of win 2k install, or your
win 2k did not install u'r hard drive correctly.Try
to re-install windows again.
 
Back
Top