[newbee]One Domain controller, 2 segments

  • Thread starter Thread starter Philippe Pons
  • Start date Start date
P

Philippe Pons

Hi,

I'm trying to configure a small network with 3 pc, ans i'm running into
newbee problems!
A runs W2000Server, has been promoted as a domain controler, has 2 network
adapters.
B runs W2000Pro, is connected to one adapter (integrated within the
motherboard)
C runs WinXPPro, is connected to the other adapter.(addin)
Both B and C are configured to automatically receive IP addresses from the
DHCP server, as well as name resolution from the DNS server.

A domain, LINCEO.local, has been set up.
From B, I can join the domain, but not from C

From A, I can ping B and C using either the name or the IP@ of B and C
But from B I cannot ping the C adapter, and conversely from C I cannot ping
the B adapter.

I configured A as a router, but no change.

What did I miss during configuration?
What can I do to telle where is the problem?

TIA,

Philippe
 
On B and C open a command prompt and run ipconfig. Make sure that the
default gateway of each machine is the IP address of the Server adapter it
is connected to.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP
 
Back
Top