New user in Active Directory

  • Thread starter Thread starter Martin
  • Start date Start date
M

Martin

Hi All!

Somebody knows why when I create a user account in Active
Directory and I try to connect from the client (Win98), it
can't connect. Olders account and Administrator account
connect whithout problem in the same pc (Win98).

Any suggestions...

bye.
 
Got the error "username no exist" in the client, both pc´s
ase in the same net and with olrder´s account connect
without problems.

Sometimes the new account logon in the 4° or 5° time, but
the next logoff, get the error.

Both pc´s are in the same tcp/ip range and i try modified
the lmhost, try too rejoining the pc uin the domain, but
get the same error.

-----Original Message-----
What error do you get

--
Richard McCall [MSFT]

"This posting is provided "AS IS" with no warranties, and confers no
rights."
Martin said:
Hi All!

Somebody knows why when I create a user account in Active
Directory and I try to connect from the client (Win98), it
can't connect. Olders account and Administrator account
connect whithout problem in the same pc (Win98).

Any suggestions...

bye.
Click to expand...


.
Click to expand...
 
I don't know anything about your domain, how many dc's etc, but if multiple
verify that there are no replication issues and that the new account you
created has replicated to the others. I'f possible if it hasn't that the 98
box is being validated by a dc that doesn't know about the account.
Can you ping the DC by name?
Wasn't clear on your statement about "re-joining" the domain. Was this
being tried with the logon to domain and also not with logon to domain set,
and the domain and workgroup names are the same?
Not sure what you put in the lmhosts file, but try adding the 1B entry for
your pdc emulator dc, via the entries in the article below, and that you see
the correct registrations with the nbtstat;
180094 How to Write an LMHOSTS File for Domain Validation and Other Name
http://support.microsoft.com/?id=180094

--
David Brandt
Microsoft Corporation

This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.
Got the error "username no exist" in the client, both pc´s
ase in the same net and with olrder´s account connect
without problems.

Sometimes the new account logon in the 4° or 5° time, but
the next logoff, get the error.

Both pc´s are in the same tcp/ip range and i try modified
the lmhost, try too rejoining the pc uin the domain, but
get the same error.

-----Original Message-----
What error do you get

--
Richard McCall [MSFT]

"This posting is provided "AS IS" with no warranties, and confers no
rights."
Martin said:
Hi All!

Somebody knows why when I create a user account in Active
Directory and I try to connect from the client (Win98), it
can't connect. Olders account and Administrator account
connect whithout problem in the same pc (Win98).

Any suggestions...

bye.
Click to expand...


.
Click to expand...
 
I Have 1 DC and 1 BDC with cluster of disk´s, the pc
client win 98 are in the same range of tcp/ip with the
domain, the ping is ok in both way (Pc to server and
server to pc)
the account isn´t replicate, the problem is with any new
account.

The errors in the event viewer are:

Event Type: Failure Audit
Event Source: Security
Event Category: Logon/Logoff
Event ID: 529
Date: 1/16/2004
Time: 10:23:31 AM
User: NT AUTHORITY\SYSTEM
Computer: S7729500
Description:
Logon Failure:
Reason: Unknown user name or bad password
User Name: C11645
Domain:
Logon Type: 3
Logon Process: NtLmSsp
Authentication Package: NTLM
Workstation Name: \\JAVILA

Event Type: Failure Audit
Event Source: Security
Event Category: Account Logon
Event ID: 681
Date: 1/16/2004
Time: 10:23:31 AM
User: NT AUTHORITY\SYSTEM
Computer: S7729500
Description:
The logon to account: C11645
by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
from workstation: \\JAVILA
failed. The error code was: 3221225578

anytimes in the 7°, 8° time logon is ok; the message in
the event viewer are:

Event Type: Success Audit
Event Source: Security
Event Category: Logon/Logoff
Event ID: 540
Date: 1/16/2004
Time: 12:01:25 PM
User: D7729500\c11645
Computer: S7729500
Description:
Successful Network Logon:
User Name: c11645
Domain: D7729500
Logon ID: (0x0,0x1BC7297B)
Logon Type: 3
Logon Process: NtLmSsp
Authentication Package: NTLM
Workstation Name: \\JAVILA

Event Type: Success Audit
Event Source: Security
Event Category: Account Logon
Event ID: 680
Date: 1/16/2004
Time: 12:01:25 PM
User: NT AUTHORITY\SYSTEM
Computer: S7729500
Description:
Account Used for Logon by:
MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Account Name:
C11645
Workstation:
\\JAVILA

in other time the logon fail.



-----Original Message-----
I don't know anything about your domain, how many dc's etc, but if multiple
verify that there are no replication issues and that the new account you
created has replicated to the others. I'f possible if it hasn't that the 98
box is being validated by a dc that doesn't know about the account.
Can you ping the DC by name?
Wasn't clear on your statement about "re-joining" the domain. Was this
being tried with the logon to domain and also not with logon to domain set,
and the domain and workgroup names are the same?
Not sure what you put in the lmhosts file, but try adding the 1B entry for
your pdc emulator dc, via the entries in the article below, and that you see
the correct registrations with the nbtstat;
180094 How to Write an LMHOSTS File for Domain Validation and Other Name
http://support.microsoft.com/?id=180094

--
David Brandt
Microsoft Corporation

This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.
Got the error "username no exist" in the client, both pc´s
ase in the same net and with olrder´s account connect
without problems.

Sometimes the new account logon in the 4° or 5° time, but
the next logoff, get the error.

Both pc´s are in the same tcp/ip range and i try modified
the lmhost, try too rejoining the pc uin the domain, but
get the same error.

-----Original Message-----
What error do you get

--
Richard McCall [MSFT]

"This posting is provided "AS IS" with no warranties, and confers no
rights."
Martin said:
Hi All!

Somebody knows why when I create a user account in Active
Directory and I try to connect from the client (Win98), it
can't connect. Olders account and Administrator account
connect whithout problem in the same pc (Win98).

Any suggestions...

bye.
Click to expand...


.
Click to expand...


.
Click to expand...
 
Back
Top