New Site to Replicate

  • Thread starter Thread starter MarkH
  • Start date Start date
M

MarkH

We just built a new building in location 2.

I moved 1 of the BDC's from location 1 to this building in location 2. How
do I get the BDC in location 2 to talk to to the PDC in location 1?

By the way, all of our ports except the ones that we need on the router's
firewall are blocked. I'm not sure if there is a special port that this comm
is suppose to talk over.
 
We have 3 Win2000 SP4 Domain Controllers. Two of these, the PDC & 1 BDC at
location 1 and 1 BDC at location 2.
 
Hello MarkH,

Since windows 2000 there is no longer a PDC/BDC concept. All DC's are the
same except of the FSMO roles, one of them is the PDCEmulator role, but theoretical
any DC can get this role.

So, if you have 2 locations, i assume you have 2 different subnets running,
connected via a router. What you have to configure is Active Directory Sites
and services and add the subnet from location 2 and also move the DC to this.

If you have clients there, make it DNS server, reconfigure the clients there
to that DNS server as preferred and it should also be a Global catalog server.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
 
I went to AD Sites and Services, setup a new site (which is my location 2),
setup the subnet with the router's static IP address and subnet mask, moved
the server that is located at location 2 to the new site and associated it
with the IP address of that location.

The server in location 2 is a DNS server. There is also a DNS server in
location 1.

Still unable to replicate.

Please bare with me, this is my 1st time doing this and my Windows 2000
Server book doesn't tell me much.
 
Back
Top