New Sapphire 9800 NP Infineon Flash Question

  • Thread starter Thread starter George
  • Start date Start date
G

George

Got the card tonight and playing around with 3DRage oc settings and
3dmark2003 I am maxing out at 400/330. If I lower the ram settings I
still cannot raise the core past 400 or I get the white dots. At
400/330 I am benching 5850 in 3Dmark2003 with a Barton 3200 and Asus
A7N8X Deluxe. I am using the Catalyst 3.9 drivers.

As stated above I have the Infineon ram. If I flash to the pro bios
would I be able to get higher core speeds?

Is there a downside to flashing with the pro bios?

Any other tips/help would be much appreciated.
 
Possibly, but I wouldn't count on a huge difference. Your core is already
past Pro specs and the Infineon isn't the best OC ram out there. Check the
tweaking forum at www.rage3d.com, where several others have had varying
success.

Those scores are pretty good already.
 
Back
Top