new mother board/cpu

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I just tried to update my mother board and cpu but xp would not boot. My old
motherboard is an intel billings D845BG with a p4 1.8ghz chip.
I want to transfer my hard drives (2) to the intel D915PGN with a 2.8ghz p4
both hard drives are ata
both drives show up in bios but xp will not boot
 
Derek4bing said:
I just tried to update my mother board and cpu but xp would not boot.
My old motherboard is an intel billings D845BG with a p4 1.8ghz chip.
I want to transfer my hard drives (2) to the intel D915PGN with a
2.8ghz p4 both hard drives are ata
both drives show up in bios but xp will not boot

Do a "Repair Installation".

http://support.microsoft.com/kb/315341
or
http://www.microsoft.com/windowsxp/expertzone/tips/dougknox/doug92.asp
or
http://www3.telus.net/dandemar/repaxp.htm
 
Derek4bing said:
I just tried to update my mother board and cpu but xp would not boot. My old
motherboard is an intel billings D845BG with a p4 1.8ghz chip.
I want to transfer my hard drives (2) to the intel D915PGN with a 2.8ghz p4
both hard drives are ata
both drives show up in bios but xp will not boot


Normally, and assuming a retail license (many OEM installations
and licenses are not transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the
one on which the WinXP installation was originally performed, you'll
need to perform a repair (a.k.a. in-place upgrade) installation, at
the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this
point. You've pulled the proverbial hardware rug out from under the
OS. (If you don't like -- or get -- the rug analogy, think of it as
picking up a Cape Cod style home and then setting it down onto a Ranch
style foundation. It just isn't going to fit.) WinXP, like Win2K
before it, is not nearly as "promiscuous" as Win9x when it comes to
accepting any old hardware configuration you throw at it. On
installation it "tailors" itself to the specific hardware found. This
is one of the reasons that the entire WinNT/2K/XP OS family is so much
more stable than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more
than 120 days since you last activated that specific Product Key,
you'll most likely be able to activate via the Internet without
problem. If it's been less, you might have to make a 5 minute phone
call.

--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
Derek4bing said:
tried to boot from cd but error "cdboot could not find NTLDR"

Make sure there is no disk in the 3.5 diskette drive.

Clean the CD. It may be dirty.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP
On-Line Help Computer Service
http://onlinehelp.bc.ca

"The reason computer chips are so small is computers don't eat much."
 
Back
Top