New Installation Compatiblity Problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have an older proprietary application (Lytec Dental software) which I have been running on XP Pro on two systems. I recently configured and installed a third computer. On this machine the Lytec software will not run and I get the "XXX.exe has encoutered a problem" screen. I turned off error reporting to try and get thru the startup but to no avail. On the other installations, I recall the software would report startup errors the first time or two it was launched but "fix itself" on the third or so startup and run thereafter. The new installation will not do this. Is there a way to compare files or registry setting for the different installations to see where the problem is with the new install?

Thanks,

Larry
 
Just an addition. All three systems are quite similar except for processors. One P4, one Celeron and one VIA. The newest is the VIA.

thanks
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows 7 Problem with Services 4
Error Installing "ADAPTEC EZCD 4.04" 1
Programs don't run afterSP2 install 2
Dreaded Error Message 4
automatic driver installation on start up 4
error message on blue screen during startup and reboot 1
XP boot hangs on black screen with scrolling blue line - how to troubleshoot? 5
Unmountable Boot Volume? 24

Back
Top