new harddrive

  • Thread starter Thread starter Rbaltera
  • Start date Start date
R

Rbaltera

Hello,

Can anyone enlighten me on haoe to acces my new scusi
hardrive via win2k. I connected it and on boot it is
recognized and in my device maneger it is also seen under
the drives. but under my "MY COMPUTER" the drive does not
list. I als tried mapping it but had no luck.

Please anyone...

Rudy
 
If the drive has no letter it has to be partitioned and formatted.
Partitioning, in Disk Management will give it a drive letter which you
can see in My Computer - but NOT use. Formatting the drive will then
let you actually use the drive.

Hello,

Can anyone enlighten me on haoe to acces my new scusi
hardrive via win2k. I connected it and on boot it is
recognized and in my device maneger it is also seen under
the drives. but under my "MY COMPUTER" the drive does not
list. I als tried mapping it but had no luck.

Please anyone...

Rudy
Click to expand...

~~~~~~
Bait for spammers:
root@localhost
postmaster@localhost
admin@localhost
abuse@localhost
postmaster@[127.0.0.1]
(e-mail address removed)
~~~~~~
Remove "spamless" to email me.
 
I just had this same problem.
Make sure the scsi drive jumper is set so the drive takes
the appropriate disk # (ie boot disk is disk 0, next is
disk 1). try uninstalling the device from device manager.
then go to right click My Comuter, manage, disk
mangement,actions, rescan disks. if this still doesn't
work do a do a low level format from scsi utilities from
scsi setup interface during boot and repeat. good luck,
santo
 
Back
Top