networking two machines

  • Thread starter Thread starter Ben
  • Start date Start date
B

Ben

I'm tring to network two machines that consist of Windows
XP and 2000 using a PC to PC parallel file tranfer cable.
When I try to use the Direct Cable Connection Wizard, but
I'm struggling with this and need some help. What do I
need to do? Do I need static ip addresses?
 
You don't need static IP's. Make sure the cable you are
using is a cross over cable, or modem cable. Are you
using a serial or RJ-45 cable? There are cross over
cables for either. Then go ahead and use Direct Cable
Connection Wizard.
 
Hello Ben,
Assigning an IP is not a requirement when setting up a Direct Cable
Connection between these two platforms, as APIPA will make sure that an IP
address is assigned when DHCP is not present (DHCP won't be present in this
case). Can you clarify regarding the problem that you are having? You
should set up one machine as host and the other as guest, and then dial
from the guest to the host. Is the problem in setting the connection up,
or in actually connecting?

Thanks,
Terry Barcroft [MSFT]

When replying, please post to GROUP so that everyone can benefit from the
knowledge.

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
--------------------
|>Content-Class: urn:content-classes:message
|>From: "Ben" <[email protected]>
|>Sender: "Ben" <[email protected]>
|>Subject: networking two machines
|>Date: Mon, 22 Sep 2003 13:48:53 -0700
|>Lines: 5
|>Message-ID: <[email protected]>
|>MIME-Version: 1.0
|>Content-Type: text/plain;
|> charset="iso-8859-1"
|>Content-Transfer-Encoding: 7bit
|>X-Newsreader: Microsoft CDO for Windows 2000
|>Thread-Index: AcOBSu8DB4YeFTJYS6Cn6XDRFa11vw==
|>X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
|>Newsgroups: microsoft.public.windowsxp.network_web
|>Path: cpmsftngxa06.phx.gbl
|>Xref: cpmsftngxa06.phx.gbl microsoft.public.windowsxp.network_web:135030
|>NNTP-Posting-Host: TK2MSFTNGXA08 10.40.1.160
|>X-Tomcat-NG: microsoft.public.windowsxp.network_web
|>
|>I'm tring to network two machines that consist of Windows
|>XP and 2000 using a PC to PC parallel file tranfer cable.
|>When I try to use the Direct Cable Connection Wizard, but
|>I'm struggling with this and need some help. What do I
|>need to do? Do I need static ip addresses?
|>
 
What do you mean dial from the Guest to the Host? Is this
supposed to be a dialup connection. Basically, what I'm
tring to do is tranfer files between two pc's before this
weekend as I'm leaving for town.

Do you know of any helpful links and tutorials for
something I'm tring to do?
 
Back
Top