Networking Problem (long description of problem)

  • Thread starter Thread starter James
  • Start date Start date
J

James

Hello all. I am having a problem networking my notebook
and my home computer. I just bought a NetGear router
(WGR614v2) and have seen that both computers are
connected to the router itself but when I made a
workgroup to network, my notebook could not join in the
network. All the procedures needed to set the computers
on the network and router has been done but nothing has
happened on the notebook. On my home computer, it can see
itself on the network but not the notebook. The notebook
cant see anything, when I try to connect to the network,
it brings up something saying "workgroup not accessible.
You may not have permission to use this network resource.
Contact the administrator of this server to find out if
you have access permissions. The list of servers of this
workgroup is not currently available."
Funny thing is is I am the one to have made the network
and I am the administrator. Actually, its not too funny.

If it helps any, my notebook has Windows XP Home while my
home comp has Windows XP Pro.

My e-mail is (e-mail address removed) . Thanks for
all the help.
 
quoted from http://www.ChicagoTech.net
.... is not accessible

Message: "....is not accessible. You may not have permission to use this
network resource. Contact the administrator of this server to find out if
you have access permissions. Network path was not found."

Resolutions:
1) make sure no any firewall running.
2) make sure you have created the same workgroup, and the same username on
w2k/xp for logging on a remote computer.
3) check user's rights.
4) you may want to enable guest account on w2k/xp.
5) if you are using simple file sharing, you may try to disable it and
re-share the drive manually.
6) if it is mixed OS (win98, NT, ME and W2K/XP) network, enable NetBIOS over
TCP/IP.
7) make sure the Computer Browser service is started if all computers are
w2k/xp.
8) stop Computer Browser service on win9x, ME and NT if this is a mixed OS
network.
9) cache credential by using net use \\computername\share /user:username
command (it is better to have the username logon shared computer).
10) if you have tried enabling netbios over tcp/ip but doesn't work, you may
try to load netbeui (loading netbeui may slow your network).
11) Make sure the server service is running.
12) If you can see the share in Network Neighborhood but not access it, this
issue may be resolved by verifying that both the share permissions and the
NTFS partition permissions are correctly configured for individual user or
group access.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
The first thing I would check is to make sure that both
machines are configured to "Obtain an IP address
autmatically." Most broadband routers are plug and play,
with their own DHCP server enabled out of the box. You
may need to check the DHCP scope and verify that each
machine is getting an IP address by opening up a command
shell and typing "IPCONFIG". If both machines are getting
an IP address on the same subnet, try pinging one machine
from the other. It could be that your Router's firewall
settings are interfering with the LAN connection. Make
sure NAT and/or DHCP is turned on in the Router.

Hope this helps!

Regards,

Glendon Gross
 
Back
Top