Networking Between XP and 2000

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,

I am currently in quite a pickle. I am trying to set up a home network
between my two desktop computers. I made a disk using the XP step by step way
but it didnt work because it says it doesnt work on 2000. I will give you
some background, 1st computer is Windows 2000 Pro and 2nd computer is Windows
XP Pro. I simply want to be able to print from 2nd computer (printer is
connected to 2000 pro computer) and I want to make a shard folder to back up
stuff from 2nd computer. I have a wired router (D-Link DI-604). The printer
in question is a hp deskjet 920c. Any help would be appreciated (prefebly
step by step ). Oh ya the broadband thing that has blincking lights is a RCA.
Also I went to network places and found my second computer but whenever I
click it it says "Computer Name" is not accessable. The network path was not
found.

Thanks,

Moxxon
 
On both computer:
- logon with the same username and password on both computers
1. open the Local Area Connetion Properties (on XP - Start, Network
Connections, right click Local Area Connection, select Properties)
2. make sure there is a check mark beside Client for Microsoft Networks and
File and Printer Sharing for Microsoft Networks
3. click on Internet Protocol (TCP/IP)
4. click Properties
5. select the "Obtain an IP address automatically" radio button
6. select the "Obtain DNS server address automatically" radio button
7. click Advanced...
8. select the WINS tab
9. select the "Enable NetBIOS over TCP/IP" radio button
10. click OK; click OK; click Close;

If you have Windows XP SP2 do steps 11 through 16; otherwise skip to step
17.

11. on the Local Area Connection's Properties page, select the Advanced tab
12. click Settings...
13. on the General tab, if the Off radio button is selected the Windows
Firewall is disabled - while this means the Firewall will not interfere with
your networking, it does mean that protection afforded by the Firewall is
turned off - skip to step 17
14. if the On radio button is selected, make sure there is no check mark in
"Don't all exceptions"
15. select the Exceptions tab
16. make sure there is a check mark beside "File and Print Sharing"; click
OK
17. create a folder share
18. click Start, Run
19. key \\computername (name of the other computer); Press Enter

You should get a Windows Explorer window showing the shares available on the
other computer and be able to view the contents of the shared folder.

You should also be able to drill down through My Network Places, Entire
Network etc., but I find that tedious. The Start, Run dialog remembers what
you have keyed, so its simple to select the \\computername entry if you need
to later.

Until you get file/folder sharing working, there is little point pursuing
printer sharing. If file/folder sharing works, but you can't get the
printer sharing to work and the information below doesn't help, I suggest
posting in the microsoft.public.windowsxp.print_fax newsgroup.

You may find that the printer driver on the Windows 2000 computer is for "NT
4 and Windows 2000". This driver quite likely won't work on Windows XP.
See
http://members.shaw.ca/bsanders/AddDrivertoOldOS.htm
http://members.shaw.ca/bsanders/NetPrinterNoPP.htm
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
--
Bruce Sanderson MVP Printing
http://members.shaw.ca/bsanders

It is perfectly useless to know the right answer to the wrong question.
 
Bruce Sanderson ... thanks for one of the most lucid and clear responses to
an involved networking question.
 
I have the identical problem. Although I have not yet
resolved all the issues I set up a separate network
connection at 2000 Pro as "Incoming Connections" through
the com1 port. After resetting the sharing for the files
and printer I am able to access everything in the Win2000
Pro from the Win XP Pro but not vice-versa. Hope it helps.
 
Back
Top