network setup

  • Thread starter Thread starter Chris
  • Start date Start date
C

Chris

Hi, I just went through this same thing, but with a
router in the middle. The main thing was to go into each
computer's Network Connections. Does the LAN icon say
connected beside it? If it does, does it also say
Firewalled? You must remove the firewall by clicking once
on the LAN icon, then click on "change the settings for
this" on the left hand side. Go to the advanced tab and
disable the firewall.


See if that works
Chris
 
Hi Chris, the LAN icon says ENABLED and it is not
firewalled. The second computer can see the workgroup with
itself in it.
Thanks for your help
John
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

computer does not show in network place after setup wizard 2
No wireless networks were found". 6
Cant access computer on the network 5
Unsecured LAN 1
Can not use network with new routers 2
Can't connect to the Internet with router setup test. 1
How do I convert my second Router into an Access Point 0
"Network cable unplugged" 7

Back
Top