network properties

  • Thread starter Thread starter aikwee
  • Start date Start date
A

aikwee

hi, anybody got an idea of this thing :

I have a XPE system that capable of configure IP address through double
clicking the "local network connection" and modify its properties.
The strange this i only able to do this (change ip,netmask etc) if i
have a network
cable plugged in....
I am working hard to resolve this , anyone know what is the remedy ?
 
Hello,

You are at the right place but with wrong question.
I have a XPE system that capable of configure IP address through double
clicking the "local network connection" and modify its properties.
The strange this i only able to do this (change ip,netmask etc) if i
have a network
cable plugged in....
I am working hard to resolve this , anyone know what is the remedy ?
Click to expand...


Try posting this question in some of network newsgroups, I recommend this
because you may have better luck with this problem.

Or try to give us more info.

When you say unable to do this, what exactly that means? You can't access
properties dialog, or you can't change values?

Are you sure that when you change value, and restart computer you have new
value?


Best regards,
Slobodan
 
hi, i am building the XPE myself actually.....
When you say unable to do this, what exactly that means? You can't access
properties dialog, or you can't change values?
Click to expand...

i can't even access the properties dialog without a network cable plugged
in.
Are you sure that when you change value, and restart computer you have new
value?
Click to expand...

yes ,it works after restart..
 
hi, i am building the XPE myself actually.....
Then you are in the right place.
i can't even access the properties dialog without a network cable plugged
in.
Click to expand...

I can't browse my computer, but not to be able to access properties dialog.
This is new to me.
yes ,it works after restart..
Click to expand...

I didn't know that you are building XPE.


Sorry, I couldn't help you.

Best regards,
Slobodan
 
Try this from knowledge base article 239924:

Use Registry Editor (Regedt32.exe) to view the following
key in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\
Parameters

Add the following registry value:
Value Name: DisableDHCPMediaSense
Data Type: REG_DWORD -Boolean
Value Data Range: 0, 1 (False, True) Default: 0 (False)

Description: This parameter controls DHCP Media Sense
behavior. If you set this value data to 1, DHCP, and even
non-DHCP, clients ignore Media Sense events from the
interface. By default, Media Sense events trigger the DHCP
client to take an action, such as attempting to obtain a
lease (when a connect event occurs), or invalidating the
interface and routes (when a disconnect event occurs).

Regards,
Hartmut
 
Back
Top