Network Layout Question, please need your advice

  • Thread starter Thread starter Jaley Martin
  • Start date Start date
J

Jaley Martin

We have a small lab that we recently expanded to seven computers and we need
to design and layout our network across a two-room facility. In the main
room, their are five computers, and one printer is shared them. Our printer
is connected directly to a network hub. We have another room with two
computers that are specialized systems that control lab tools. We often each
work from our own computers and use a remote desktop session on the
specialized lab computers to manipulate experiments in the lab.

What would be the best network layout for our situation? Would you use a
star topology or a ring? Can you please explain to me the best way to do this?
 
Jaley said:
We have a small lab that we recently expanded to seven computers and we need
to design and layout our network across a two-room facility. In the main
room, their are five computers, and one printer is shared them. Our printer
is connected directly to a network hub. We have another room with two
computers that are specialized systems that control lab tools. We often each
work from our own computers and use a remote desktop session on the
specialized lab computers to manipulate experiments in the lab.

What would be the best network layout for our situation? Would you use a
star topology or a ring? Can you please explain to me the best way to do this?
Click to expand...

There seems to be very little to recommend a ring network topology.
Among other disadvantages, consider that one malfunctioning workstation
can cause problems for the entire network.

What you probably should do is to replace your hub with a switch and
connect all of the devices to the switch (i.e., a star configuration).
A switch is a more intelligent network device than a hub, and the
network is less likely to suffer data packet collisions, and thus will
be faster. See, e.g., http://www.duxcw.com/faq/network/hubsw.htm or any
of the myriad of other hits from http://tinyurl.com/yzgf7nn

Switches are not very expensive:
http://www.newegg.com/Product/Produ...00030 1733245520 115010988 1319845522&name=No

You need one with 8 or more ports, e.g.,:
http://www.newegg.com/Product/Product.aspx?Item=N82E16833122006
 
What you probably should do is do your own homework.

Star/Ring topology? They're seriously still teaching that stuff?
 
Hi
In case of small networks using Windows there are basic two layout.
1. Using peer-to-peer Network.
2. Using a network around a Server (Like Windows 2008).
Geographical placing of the computers is not relevant to the topology
per-se.
With today Wireless and internet, you can use the above even if the
computers are spread all over the world.
Jack (MS, MVP-Networking).
 
Back
Top