Network drive Mapping

  • Thread starter Thread starter David
  • Start date Start date
D

David

I have an machine running XP that is connected to the
domain. when a user logs on, all availabe drive letters
are mapped to the same network location. Disconnecting
them only works for a few minutes, as they all get
reconnected to the same location... any ideas?
 
quoted from http://www.ChicagoTech.net
Why some mapped network drives show a red x

SYMPTOMS: You find that the network drive mapping may be disconnected after
15 minutes of inactivity and Windows Explorer may display a red "X" on the
icon of the mapped drive. However, if you double-click it reconnects
quickly.

RESOLUTION: by default, idle connections will be dropped after 15 minutes.
To modify idle time, at a command prompt using net config server
/autodisconnect: minutes. For example, to set the Autodisconnect value to
30 minutes, you would run the following command line: net config server
/autodisconnect:30. If you would like to turn Autodisconnect off, do net
config server /autodisconnect:-1.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top