Network Bridging in W2K Server?

  • Thread starter Thread starter Mike Leach
  • Start date Start date
M

Mike Leach

I have a standard install of Win 2K Server setup as a PDC.
In this server there are 2x NIC's 1 of which is a
100MB/Sec and the other is 1000MB/Sec. These two nics are
connected to 2 seperate networks. Is there anyway that i
can set up these nics so that each network (100 & the
1000) can pass through each other (like a simple switch)
because at the moment each network can see the server, but
they can't pass through the server to each other.

any help would be very much appreciated

Thanks in Advance


Mike
 
: I have a standard install of Win 2K Server setup as a PDC.
: In this server there are 2x NIC's 1 of which is a
: 100MB/Sec and the other is 1000MB/Sec. These two nics are
: connected to 2 seperate networks. Is there anyway that i
: can set up these nics so that each network (100 & the
: 1000) can pass through each other (like a simple switch)
: because at the moment each network can see the server, but
: they can't pass through the server to each other.

Enable and configure RRAS for the two NICs however there is probably a
better solution which cannot be suggested without knowing the details of
your two networks.

--
Roland Hall
/* This information is distributed in the hope that it will be useful, but
without any warranty; without even the implied warranty of merchantability
or fitness for a particular purpose. */
Online Support for IT Professionals -
http://support.microsoft.com/servicedesks/technet/default.asp?fr=0&sd=tech
How-to: Windows 2000 DNS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;308201
FAQ W2K/2K3 DNS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;291382
 
Back
Top