.NET Framework 2.0

  • Thread starter Thread starter Terry
  • Start date Start date
T

Terry

I have an accounting program that must use .NET Framework 2.0. The program as
worked for several years on my XP Pro machine. Now it will not load. Event
viewer as it is a .NET Framework 2.0 Error.

However I cannot install the dotnetfx.exe says it is the wrong verson.

Where do I start to resolve this issue.
 
Please state your full Windows version (e.g., WinXP SP3).

What program & version is it?
Event viewer [says?] it is a .NET Framework 2.0 Error.
Click to expand...
Click to expand...
Click to expand...

Post the complete error message.

The wrong version of what? Post the complete error message.

Is .NET Framework 2.0 SP1 installed?

The above notwithstanding...

1. Important: Write down what .NET Framework versions are already installed!
See http://support.microsoft.com/kb/318785

2. Now try Resolutions Method 1 in http://support.microsoft.com/kb/923100
(ignore the title); If no joy, try Method 2.

3. If still no joy, see this related post by my colleague MowGreen (ignore
any references to updating .NET Framework):
http://groups.google.com/group/microsoft.public.windowsupdate/msg/4d76de7769d04493
 
I have XP Pro SP3

The app is Peachtree accounting, when I load the app it says: "Peactree has
encountered a problem and must close, etc."

Event Viewer says: Event ID 100 .NET Runtime 2.0 Error

I searched for this error in the KB then tried the hotfix: dotnetfx and get:

"Setup cannot continue because this version of the .NETframeword in
incompatible wiht a previously installed one."

Yes .NET Framework 2.0 SP1 is installed.

I will look at your other suggestions in the am and post a new reply after
trying them.
Thanks



PA Bear said:
Please state your full Windows version (e.g., WinXP SP3).

What program & version is it?
Event viewer [says?] it is a .NET Framework 2.0 Error.
Click to expand...
Click to expand...

Post the complete error message.

The wrong version of what? Post the complete error message.

Is .NET Framework 2.0 SP1 installed?

The above notwithstanding...

1. Important: Write down what .NET Framework versions are already installed!
See http://support.microsoft.com/kb/318785

2. Now try Resolutions Method 1 in http://support.microsoft.com/kb/923100
(ignore the title); If no joy, try Method 2.

3. If still no joy, see this related post by my colleague MowGreen (ignore
any references to updating .NET Framework):
http://groups.google.com/group/microsoft.public.windowsupdate/msg/4d76de7769d04493
--
~PA Bear


My updates are up to date, did not help by trying to do undates again.
Click to expand...
Click to expand...
 
I unstalled and re installed per your suggestion.
Opened Peachtree just fine. Tried to open again failed with same error (.NET
Framwork 2.0 Runtime error)

However if I reboot I can open Peachtree but only once until I re boot again.

Terry said:
I have XP Pro SP3

The app is Peachtree accounting, when I load the app it says: "Peactree has
encountered a problem and must close, etc."

Event Viewer says: Event ID 100 .NET Runtime 2.0 Error

I searched for this error in the KB then tried the hotfix: dotnetfx and get:

"Setup cannot continue because this version of the .NETframeword in
incompatible wiht a previously installed one."

Yes .NET Framework 2.0 SP1 is installed.

I will look at your other suggestions in the am and post a new reply after
trying them.
Thanks



PA Bear said:
Please state your full Windows version (e.g., WinXP SP3).
I have an accounting program that must use .NET Framework 2.0. The
program
as worked for several years on my XP Pro machine. Now it will not load.
Click to expand...

What program & version is it?
Event viewer [says?] it is a .NET Framework 2.0 Error.
Click to expand...

Post the complete error message.
However I cannot install the dotnetfx.exe says it is the wrong verson.
Click to expand...

The wrong version of what? Post the complete error message.

Is .NET Framework 2.0 SP1 installed?

The above notwithstanding...

1. Important: Write down what .NET Framework versions are already installed!
See http://support.microsoft.com/kb/318785

2. Now try Resolutions Method 1 in http://support.microsoft.com/kb/923100
(ignore the title); If no joy, try Method 2.

3. If still no joy, see this related post by my colleague MowGreen (ignore
any references to updating .NET Framework):
http://groups.google.com/group/microsoft.public.windowsupdate/msg/4d76de7769d04493
--
~PA Bear


My updates are up to date, did not help by trying to do undates again.

:
http://windowsupdate.microsoft.com
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Terry wrote:
I have an accounting program that must use .NET Framework 2.0. The
program
as worked for several years on my XP Pro machine. Now it will not load.
Event viewer as it is a .NET Framework 2.0 Error.

However I cannot install the dotnetfx.exe says it is the wrong verson.

Where do I start to resolve this issue.
Click to expand...
Click to expand...
Click to expand...
 
Are you running Peachtree 2008, 2009, or an earlier version? cf.
http://www.peachtree.com/support/vista/default.cfm?WT.mc_id=RD_peachtree.com/vista;
http://www.peachtree.com/peachtreeaccountingline/complete/system.cfm;

In any event, I'd contact Peachtree Support about this or check the Sage KB
via http://www.peachtree.com/support/rightnow/login.cfm

The above notwithstanding...

Free unlimited installation and compatibility support is available for
Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
e-mail support is available only in the United States and Canada.

• US:
http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131

• CA:
http://support.microsoft.com/oas/default.aspx?ln=en-ca&prid=11273&gprid=522131

• UK:
http://support.microsoft.com/oas/default.aspx?ln=en-gb&prid=11273&gprid=522131

• AU:
http://support.microsoft.com/oas/default.aspx?ln=en-au&prid=11273&gprid=522131

• Other: http://support.microsoft.com/oas/default.aspx?gprid=1173 | select
Windows XP | select Windows XP Service Pack 3
--
~PA Bear

I unstalled and re installed per your suggestion.
Opened Peachtree just fine. Tried to open again failed with same error
(.NET
Framwork 2.0 Runtime error)

However if I reboot I can open Peachtree but only once until I re boot
again.

Terry said:
I have XP Pro SP3

The app is Peachtree accounting, when I load the app it says: "Peactree
has
encountered a problem and must close, etc."

Event Viewer says: Event ID 100 .NET Runtime 2.0 Error

I searched for this error in the KB then tried the hotfix: dotnetfx and
get:

"Setup cannot continue because this version of the .NETframeword in
incompatible wiht a previously installed one."

Yes .NET Framework 2.0 SP1 is installed.

I will look at your other suggestions in the am and post a new reply
after
trying them.
Thanks



PA Bear said:
Please state your full Windows version (e.g., WinXP SP3).

I have an accounting program that must use .NET Framework 2.0. The
program
as worked for several years on my XP Pro machine. Now it will not
load.

What program & version is it?

Event viewer [says?] it is a .NET Framework 2.0 Error.

Post the complete error message.

However I cannot install the dotnetfx.exe says it is the wrong
verson.

The wrong version of what? Post the complete error message.

Is .NET Framework 2.0 SP1 installed?

The above notwithstanding...

1. Important: Write down what .NET Framework versions are already
installed! See http://support.microsoft.com/kb/318785

2. Now try Resolutions Method 1 in
http://support.microsoft.com/kb/923100
(ignore the title); If no joy, try Method 2.

3. If still no joy, see this related post by my colleague MowGreen
(ignore
any references to updating .NET Framework):
http://groups.google.com/group/microsoft.public.windowsupdate/msg/4d76de7769d04493
--
~PA Bear



Terry wrote:
My updates are up to date, did not help by trying to do undates again.

:
http://windowsupdate.microsoft.com
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Terry wrote:
I have an accounting program that must use .NET Framework 2.0. The
program
as worked for several years on my XP Pro machine. Now it will not
load.
Event viewer as it is a .NET Framework 2.0 Error.

However I cannot install the dotnetfx.exe says it is the wrong
verson.

Where do I start to resolve this issue.
Click to expand...
Click to expand...
Click to expand...
 
Back
Top