Neeed help

  • Thread starter Thread starter jak
  • Start date Start date
J

jak

hey guys.. i reali need help with this.. i am currentli using a toshiba
notebook which is running on vista.. and is connected wirelessli to my
netgear WGT624. The WGT624 is connected to a netcom VOIP via a ETHernet cable
and another ETHernet cable is running from the VOIP to my Thomson speedtouch
modem.

now, everything work perfectli with my vista comp i can go online and
everyhting.. but i recently got my old xp notebook fixed.. i bring it
home try to connect it to the Netgear wirelessli.. it connects but it says
"the connection is limited or no connectivity" . how do i fix this problem?
please help!
 
The wireless may not get IP from DHCP. Does ipconfig /all shows 169.254.x.x
IP? Or this link may help.
Troubleshooting limited or no connectivity
"This connection has limited or no connectivity. " ... check this
page, Sent packets only on a wireless computer and Limited or no connection
....
www.chicagotech.net/troubleshooting/noconnectivity.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 
Yep.. ipconfig shows autoconfiguration 169.254.121.242

do i need to update the network adopter .. or the wireless adopter.. since
i used vista to configure.. the wireless router?? or should i reformat the
xp and re install a fresh copy so all previous configuration wipes out and
then re-configure wireless router through xp?
 
Back
Top