Need to replace mouse on desktop set

  • Thread starter Thread starter Fallstar
  • Start date Start date
F

Fallstar

I have been using a Wireless Desktop Elite keyboard and mouse set for several
years. They share one wireless receiver. But over the last month my mouse is
always double-clicking for every single click I make, and is driving me
crazy! So I would like to just replace the mouse.

Is it possible to replace the mouse with another MS wireless laser mouse,
and use the same receiver from the original desktop set? I don't want to
replace the whole set, as the keyboard works fine, and it cost me $100 when I
bought it. :o/
 
Fallstar said:
I have been using a Wireless Desktop Elite keyboard and mouse set for
several years. They share one wireless receiver. But over the last month
my mouse is always double-clicking for every single click I make, and is
driving me crazy! So I would like to just replace the mouse.

Is it possible to replace the mouse with another MS wireless laser mouse,
and use the same receiver from the original desktop set? I don't want to
replace the whole set, as the keyboard works fine, and it cost me $100
when I bought it. :o/
Click to expand...

You will need to contact the Desktop/Mouse mftr. to ask them that question.

Malke
 
But over the last month my mouse is
always double-clicking for every single click I make, and is driving me
crazy!
Click to expand...

This is quite common - the microswitch goes noisy.

If the manufacturer can't help, perhaps you could find a local electronics
hobbyist or repair shop, and ask them to change the microswitch. A good
workaround, if the microswitch is a type not easily available, is simply to
swap the left and right switches. They are almost always identical.

SteveT
 
This is quite common - the microswitch goes noisy.
If the manufacturer can't help, perhaps you could find a local electronics
hobbyist or repair shop, and ask them to change the microswitch. A good
workaround, if the microswitch is a type not easily available, is simply to
swap the left and right switches. They are almost always identical.
Click to expand...


Thank you for your reply Steve! Where is the microswitch located, inside the
mouse? I'm not sure how to go about disassembling the mouse, but will give it
a try...with the help of the techs at work.
 
Thank you for your reply Steve! Where is the microswitch located, inside
the
mouse? I'm not sure how to go about disassembling the mouse, but will give
it
a try...with the help of the techs at work.
Click to expand...

Yes, to an electronics techie it will be relatively straightforward (I've
done it a few times myself - Microsoft mice seem slightly more prone to it
than Logitech).

The microswitches are usually mounted on a circuit board, just underneath
the left and right buttons (there's one under the scroll wheel too, but I've
never known on go noisy as they are rarely used).

You will have to dismantle the mouse, so you should be aware that there is a
risk it will all go horribly wrong!

STeveT
 
Back
Top