need to recover from PartitionMagic Error 116 - please help

  • Thread starter Thread starter Adam
  • Start date Start date
A

Adam

My system is running Windows 98 SE.

After the PM7 window opens, I get the error (for disk #1):
Error 116 - Partition table Begin and Start inconsistent

I'd like to backup partitions on disk #1 but
PM7 won't allow it so long as it thinks there are errors.
Despite the error from PM7, my system works fine.
I just can't backup my partitions, which I really need to do.
 
Adam said:
My system is running Windows 98 SE.

After the PM7 window opens, I get the error (for disk #1):
Error 116 - Partition table Begin and Start inconsistent

I'd like to backup partitions on disk #1 but
PM7 won't allow it so long as it thinks there are errors.
Despite the error from PM7, my system works fine.
I just can't backup my partitions, which I really need to do.
Click to expand...

You can actually copy the partition of which the entries in the partition
table are incorrect by using the rescue disks.
Run PartitionMagic from the 2nd rescue disk by entering:

pqmagic /ipe

--
M.f.G.
Michael Kimmer

"Ein Tag an dem Du nicht lächelst ist ein verlorener Tag"
"Eine Nacht in der Du nicht schläfst ist eine verschlafene Nacht"
 
Finally got around to defrag and backup...

And, your suggestion worked like a charm.

Whew! What a relief. Thanks!
 
*cut*
Finally got around to defrag and backup...

And, your suggestion worked like a charm.

Whew! What a relief. Thanks!
Click to expand...
It still requires a fix !
/ipe does actually copy the partition, but does NOT solve the error 116

--
M.f.G.
Michael Kimmer

"Ein Tag an dem Du nicht lächelst ist ein verlorener Tag"
"Eine Nacht in der Du nicht schläfst ist eine verschlafene Nacht"
 
That's right. So, what I did was transfer the crucial Windows partition(s) onto
another disk leaving the problematic (at least for PM7) Linux partitions that
I don't care that much about. PM7 seems to have problems when
there is a mixture of Windows and Linux partitions on the same disk.
 
That's right. So, what I did was transfer the crucial Windows
partition(s) onto another disk leaving the problematic (at least for
PM7) Linux partitions that
I don't care that much about. PM7 seems to have problems when
there is a mixture of Windows and Linux partitions on the same disk.
Click to expand...
Known issue if you let Linux write in the partition table.
Just install Linux without letting YAST or whatever setup change the
partitiontable...

--
M.f.G.
Michael Kimmer

"Ein Tag an dem Du nicht lächelst ist ein verlorener Tag"
"Eine Nacht in der Du nicht schläfst ist eine verschlafene Nacht"
 
I'm pretty sure that PM7 is what caused the problem.
Linux was already installed and working (before the problem).
Even before Linux was installed (long ago),
I used PM7 to setup the Linux partitions.
My guess is that the problem came about when
I created additional FAT32 primary partition(s) while
there were already a mixture of FAT32 and Linux partitions.
This happened before and guru Svend came to my rescue by
recovering my Linux ext2 partition that PM7 messed up.
I'm hoping that he will help me out again.

Svend, where are you?
 
Adam said:
I'm pretty sure that PM7 is what caused the problem.
Linux was already installed and working (before the problem).
Even before Linux was installed (long ago),
I used PM7 to setup the Linux partitions.
My guess is that the problem came about when
I created additional FAT32 primary partition(s) while
there were already a mixture of FAT32 and Linux partitions.
Click to expand...
This happened before and guru Svend came to my rescue by
recovering my Linux ext2 partition that PM7 messed up.
Click to expand...

It happened to you before but you still use that lame product?
Do you ever learn?
I'm hoping that he will help me out again.

Svend, where are you?
Click to expand...

At his email address, obviously
 
Back
Top