Need EXPERT! : ) Remote Desktop w/Server'03

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Here is my setup:
Domain server w/Active Directory running Server 2003 w/5 CALs
5 workstations on domain, 6 user accounts set up
DSL for Internet, Cable for internet at home
Remote desktop enabled on server and one XP Pro machine
Symantec Antivurus Corporate running on server w/firewall disabled
Router IPs mapped using NAT, pinholes configured, ports configured for RD
Remote Desktop works great on server, worked great for 3 days on XP Pro machine
Why did the workstation suddenly stop working?
Everything is still configured properly, Terminal Services service is set to manual
Cannot access workstation internally from server either through Remote Desktop
XP Pro workstation is still on network and working fine/surfing Internet
Can ping workstation IP address remotely

Any thoughts...it's kicking my butt! : ) Thanks in advance
 
Have you re-verified that Remote Desktop is still enabled on the
workstations? Also dobule check the event log on the workstations you
can't access to see if there is a reason why Remote Desktop may not be
enabled and/or functioning...

Jeffrey Randow (Windows MVP - Networking & Smart Display)
(e-mail address removed)

Please post all responses to the newsgroups for the benefit
of all USENET users. Messages sent via email may or may not
be answered depending on time availability....

Remote Networking Technology Wiki -
http://www.remotenetworktechnology.com
Smart Display Support - http://www.smartdisplays.net
Windows XP Expert Zone - http://www.microsoft.com/windowsxp/expertzone
 
I just had this happen, and although it doesn't appear to be your problem,
I'll offer it anyway.
Did the internal IP address of your Pro Machine get reassigned by DHCP? For
some reason
mine changed from 192.168.0.100 to 101 and it's the only machine in the
router at this point.

Charlie
 
Back
Top