NCCH-DL help

  • Thread starter Thread starter Mks
  • Start date Start date
M

Mks

Can anybody help me understand this
During initial boot, post screen shows me this

START

ASUS NCCH-DL ACPI Bios Revision 1005
Main Processor Intel Xeon(tm) 2.80GHz (200x14.0)
Logic Processor Intel Xeon(tm) 2.80GHz (200x14.0)

CPU Brand Name: Intel(R) Xeon(tm) CPU 3.8GHz
C1E Bios Supported



03/09/2005 - Canterwood - NCCH-DL-00

END


Why is my Main & Logic processor shown as 2.8Ghz?
I haven't made any overclocking related changes in the bios..

thanks,
Mks
 
Can anybody help me understand this
During initial boot, post screen shows me this

START

ASUS NCCH-DL ACPI Bios Revision 1005
Main Processor Intel Xeon(tm) 2.80GHz (200x14.0)
Logic Processor Intel Xeon(tm) 2.80GHz (200x14.0)

CPU Brand Name: Intel(R) Xeon(tm) CPU 3.8GHz
C1E Bios Supported



03/09/2005 - Canterwood - NCCH-DL-00

END


Why is my Main & Logic processor shown as 2.8Ghz?
I haven't made any overclocking related changes in the bios..

thanks,
Mks
Click to expand...

Check the multiplier setting in the BIOS. The multiplier
on Xeon processors can be changed from its maximum value
to a lower value, and you may need to set it correctly
to get the processor to run at its rated speed. 14x happens
to be the default lowest multiplier for a lot of recent Intel
processors, so turning the multiplier up should help.

Paul
 
Back
Top