NAT SERVER AND PRIVATE BROADCASTING ADAPTER

  • Thread starter Thread starter bouvet
  • Start date Start date
B

bouvet

Hello,
i've a w2k server configured as a router to connect my
little private netwotk to internet.
I'm using nat service and i've no trouble to go outside in
internet.
My problem is this: attached to my private network there
is an ethernet adapter connected to a videocamera, that
sends udp and tcp traffic visible trought internet
explorer and a little java application.
i need to see this from internet, so the traffic generated
by my adapter (ip 192.168.0.3)could be viewed every where
there is an internet connections and a browser
someone can tell me a step by step to do so ?
thank
 
Hello,
i've a w2k server configured as a router to connect my
little private netwotk to internet.
I'm using nat service and i've no trouble to go outside in
internet.
My problem is this: attached to my private network there
is an ethernet adapter connected to a videocamera, that
sends udp and tcp traffic visible trought internet
explorer and a little java application.
i need to see this from internet, so the traffic generated
by my adapter (ip 192.168.0.3)could be viewed every where
there is an internet connections and a browser
someone can tell me a step by step to do so ?
thank
Click to expand...

Not step-by-step, but....

In the setup of the NAT software, you have to map a port to the camera
device. If the camera is visible form the internet with IE, it may be using
port 80. The manual for the camera should say what port it uses, or on the
mfg website.
 
-----Original Message-----
"(e-mail address removed)"
[...]
Click to expand...
Click to expand...

Not step-by-step, but....

In the setup of the NAT software, you have to map a port to the camera
device. If the camera is visible form the internet with IE, it may be using
port 80. The manual for the camera should say what port it uses, or on the
mfg website.
Click to expand...

Is it right to map a port in incoming like 12345, an
outgoing leave it 80 (the right port of my device), and
then access via web browser with a url like this
http://(nic's ip address attached to internet):12345 ?
 
-----Original Message-----
"(e-mail address removed)"
[...]
Click to expand...
Click to expand...

Not step-by-step, but....

In the setup of the NAT software, you have to map a port to the camera
device. If the camera is visible form the internet with IE, it may be using
port 80. The manual for the camera should say what port it uses, or on the
mfg website.
Click to expand...

Is it right to map a port in incoming like 12345, an
outgoing leave it 80 (the right port of my device), and
then access via web browser with a url like this
http://(nic's ip address attached to internet):12345 ?
Click to expand...

yes, if the camera device is listening for connections on port 12345.
 
Back
Top