Name Resolution Issue

  • Thread starter Thread starter beesnbuzz
  • Start date Start date
B

beesnbuzz

I disabled the nic in my Win2K server and replaced it with a newer GigE
network card. This server takes care of DNS, DHCP, AD. I assigned the
same IP values from the old nic to the new nic once it was installed
and the original nic was disabled. What's happening now is machines
that are not members of the domain (roughly 10-30 of various
workgroups) cannot ping the server by Name only. They are resolving
the server name to a random IP address that is not at all related to
the IP scheme we are using. They can ping the server by its actual IP
address and can release and renew their IP addresses through the server
with no problem. The name resolution problem didn't occur until I
installed the new nic. This is affecting their access to share's,
etc... I tried flushing the DNS on the workstations but still have the
same issue. Any advice would be greatly appreciated. Thank you in
advance!!!

Steve
 
Check your DNS records and make sure the name of the server has the
correct IP.
Also run ipconfig /all on the client machines that are resolving the
wrong IP and see what DNS/DHCP server they are using. Make sure its the
right one.
 
Back
Top