My report Miss 2 labels

  • Thread starter Thread starter =?iso-8859-1?Q?Paulo_Gon=E7alves?=
  • Start date Start date
?

=?iso-8859-1?Q?Paulo_Gon=E7alves?=

I'm working in a access 2002 database and i'm trying to do
a mailling list, all it's working fine the problem is in
the generated report, i want the output report to be a 16
labels page (105x37 mm) (A4) but i can print the last 2
labels in the bottom of the page, i just try everything
but i cant get ride of the problem.
Could some one help me?? Please?
 
Try add:
Top Margin + (Detail Height*8) + Bottom Margin
Don't round the answer and compare it to the total paper height. I expect
you may need to reduce the top margin slightly.
 
Thank you for your help, but i use your formula and the
best that i do was get of there position the other 14
labels, is there other option?
 
You may need to check non-printable margins in the Printer Setup, especially
if you use non-laser, friction feed such as most ink-jet printers. Since
the rollers need to holds the paper firmly while printing, the non-printable
margin is set fairly high for ink-jet printer, generally about 1.5 cm. If
this goes into the Label area, the bottom two Labels will not be used.

Laser printers don't have this problem as paper has to go through the
thermal unit to bind the toner to paper before coming out so the
non-printable bottom margin can even be zero.

--
HTH
Van T. Dinh
MVP (Access)



Thank you for your help, but i use your formula and the
best that i do was get of there position the other 14
labels, is there other option?
 
Back
Top