My printer prints only blank pages

  • Thread starter Thread starter Manlio Laschena
  • Start date Start date
M

Manlio Laschena

I have an old HP laserjet mod. IIIP . It's a model no more supported
by HP.
Suddenly, few days ago, happened that when I select print command the
printer shows, in its control display, that is acquiring data but
produces only blank pages.
Randomly the first page is OK but followed by all blanks.
The same happen on test page. Some time it prints OK but more often
produce a blank page.

I have reinstalled the drivers so as controlled the port.
If I replace the printer everything is OK.
Cabling is ok, so as the status of printer connectors.

Some one has an idea ?

Thanks

Manlio Laschena
http://Delphi-Jedi.org
 
What happens when you print the font list or test page from the printer
without going through the computer?

Sean
 
Just think of how much toner you're saving.




->What happens when you print the font list or test page from the
printer
->without going through the computer?
->
->Sean
->
->->> Followup to msg on Mon, 27 Oct 2003 19:42:53 GMT, "CWatters"
->> <[email protected]> :
->> (Original msg on bottom)
->>
->> you assume correctly. The toner is OK.
->> When randomly the printer works correctly the page is printed with
the
->> usual good definition.
->>
->> Thanks for thinking about
->> Manlio
->>
->>
->> >I assume the ink isn't very low.
->> >
->> >
->>
->> Manlio Laschena
->> http://Delphi-Jedi.org
->
 
On Mon, 27 Oct 2003 16:59:06 GMT, Manlio Laschena wrote:

=>I have an old HP laserjet mod. IIIP . It's a model no more supported
=>by HP.
=>Suddenly, few days ago, happened that when I select print command the
=>printer shows, in its control display, that is acquiring data but
=>produces only blank pages.
=>Randomly the first page is OK but followed by all blanks.
=>The same happen on test page. Some time it prints OK but more often
=>produce a blank page.
=>
=>I have reinstalled the drivers so as controlled the port.
=> If I replace the printer everything is OK.
=>Cabling is ok, so as the status of printer connectors.
=>
=>Some one has an idea ?
=>
=>Thanks
=>
=>Manlio Laschena
=>http://Delphi-Jedi.org

Sounds like an intermittent circuit failure --> the machine
is failing.
 
Back
Top