My Computer Reboots Automatically

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My computer reboots automatically and i went to properties of my computer
i entered under Advanced Tab
I entered under Startup & Recovery
I unchecked Automatically restart

After this the rebooting continued and i still receive the following message:
Disable or remove any newly installed hardware or software.
Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable componenets, restart your
computer, press F8 to select Advanced Startup Options, and then select Safe
Mode.

Technical Information:
***STOP:0x0000000A(0x0A050005,0x00000002,0x00000000,0x80517122)
Beginning dump of physical memory.
Physical memory dump complete.

This problem really bothers me, so if anyone can help me i would really
appreciate it.
 
Well, have you installed any new hardware recently?

Is this error appearing during an install of XP, or just happened out of the blue? (highly unlikely unless your hard drive is failing or something similiar)

http://support.microsoft.com/?kbid=314063

"Stop error 0x0000000A (Stop 0x0A) indicates that there was an attempt in kernel mode to touch pageable memory at too high a process internal request level (IRQL). Typically, this error occurs when a driver uses an incorrect memory address. Other possible causes of this error are an incompatible device driver, a general hardware problem, and incompatible software. "

| My computer reboots automatically and i went to properties of my computer
| i entered under Advanced Tab
| I entered under Startup & Recovery
| I unchecked Automatically restart
|
| After this the rebooting continued and i still receive the following message:
| Disable or remove any newly installed hardware or software.
| Disable BIOS memory options such as caching or shadowing.
| If you need to use Safe Mode to remove or disable componenets, restart your
| computer, press F8 to select Advanced Startup Options, and then select Safe
| Mode.
|
| Technical Information:
| ***STOP:0x0000000A(0x0A050005,0x00000002,0x00000000,0x80517122)
| Beginning dump of physical memory.
| Physical memory dump complete.
|
| This problem really bothers me, so if anyone can help me i would really
| appreciate it.
|
| --
| beebarose
 
Back
Top