Multiple monitors with 9700AIW + 9200 (PCI)

  • Thread starter Thread starter Eric
  • Start date Start date
E

Eric

Hi,

There is a 9700AIW(AGP) and a 9200(PCI) in a system that has to have
dual-monitors working. Hydravision works even with the Primary card
set as AGP in the CMOS.

However, when both monitors are set as "attached" in WindowsXP, the TV
tuner app doesn't work.

The second monitor attached to the 9200 has to be set to un-'attached'
for the TV tuner app to work.

Has anyone gotten around this limitation and is able to run the TV
tuner app with both monitors operating?

thanks!

Eric
 
Eric said:
Hi,

There is a 9700AIW(AGP) and a 9200(PCI) in a system that has to have
dual-monitors working. Hydravision works even with the Primary card
set as AGP in the CMOS.

However, when both monitors are set as "attached" in WindowsXP, the TV
tuner app doesn't work.

The second monitor attached to the 9200 has to be set to un-'attached'
for the TV tuner app to work.

Has anyone gotten around this limitation and is able to run the TV
tuner app with both monitors operating?

thanks!

Eric
Click to expand...
It's just not going to work. I tried for months. The TV app will only run on
the Primary Monitor
 
I had lots of "limitations" and "just won't do it" when I had two ATI cards
attached for multi-monitor. Swapped out the ATI pci card for a Matrox and
all works as expected.

It appears the "detection" logic in ATI's drivers just isn't reallty
prepared to find two separate ATI video cards. You can get it all to work,
but it's an effort that has to be repeated anytime you want to update
drivers etc.
 
Back
Top