Multihomed situation

  • Thread starter Thread starter Ryle
  • Start date Start date
R

Ryle

Working at a client with small office. 5 PC's, two
printers PC attached, workgroup. One PC has a dial on
demand DSl connection, so the PC is multi homed. NICs are
both IP, one static (private), one dynamic (DSL). PC has
issues staying connected to private network, of course,
most likely due to routes. How to I resolve the issue of
default gateway with an IP that changes?

Binding order is private, DSL, in that order.
 
are you using ICS? posting the routing table may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Not at client's today; however, will be there tomorrow
morning. Will post ipconfig at that time, is this ok?

Additionally, no ICS; however, I want to deploy this after
routing issue is resolved.
 
No ICS at this time; however, I want to deploy this after
issues are resolved.

Posting the routing table? Do you have a link to this
info?
 
The best thing is to let Windows to manage the routing table in common
situations, so you can wipe off your routes and configure ICS only. Next
step is to install a hardware router/firewall.
 
Back
Top