MSI KT7 Turbo + Enermax fan monitor

  • Thread starter Thread starter Fred
  • Start date Start date
F

Fred

MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU.

The Enermax has a 3-pin fan monitor connector, which the Enermax manual
says connect to the "Power Fan connector" on the MB. The MSI does have the
S_FAN1 "[system] Fan Power Connector" as the likely candidate.
 
MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU.

The Enermax has a 3-pin fan monitor connector, which the Enermax manual
says connect to the "Power Fan connector" on the MB. The MSI does have the
S_FAN1 "[system] Fan Power Connector" as the likely candidate.
Click to expand...


Uh, ok.

None of it matters anyway. You just have to remember what you plugged in
where.
 
MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU.

The Enermax has a 3-pin fan monitor connector, which the Enermax manual
says connect to the "Power Fan connector" on the MB. The MSI does have the
S_FAN1 "[system] Fan Power Connector" as the likely candidate.
Click to expand...

I'm sorry, you didn't state the answer in the form of a question.

If you want RPM monitoring, any fan header (since any remotely
modern board has RPM-monitoring on all 3-pin fan headers) will
suffice, but it is not necessary to plug that into anything at
all, IIRC.
 
Back
Top