MS8137C ???

  • Thread starter Thread starter Kid
  • Start date Start date
K

Kid

I wanted to run AMD Athlon XP 2600+ on MS8137C.
When I put it into socket it didn't work.
So, I went on www.matsonic.com and downloaded
MB manual, and didn't find anything helpful.
The question is does my MB support AMD Athlon XP 2600+?

Now, I run it with AMD XP 1600.

Thanks.
 
I wanted to run AMD Athlon XP 2600+ on MS8137C.
When I put it into socket it didn't work.
So, I went on www.matsonic.com and downloaded
MB manual, and didn't find anything helpful.
The question is does my MB support AMD Athlon XP 2600+?

Now, I run it with AMD XP 1600.

Thanks.
Click to expand...

Is it KT600 chipset?

If so, it should work. Check the jumpers. Try clearing
CMOS. Try updating the bios. Is your power supply
sufficient or a cheapie like the motherboard? XP2600 uses a
few more amps. It's also using a higher FSB rate, is your
memory PC2700 or better? Could be the board is just buggy,
try removing all but one memory module and try it in
different slots. Try increasing memory voltage in bios if
possible. Visit a hardware web forum like
http://forums.amdmb.com , there might be fellow users of
that board there.
 
Back
Top