MovieMaker 2.1, Capture Card: ASUS TV7133 Video Capture Card Probl

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Using a JVC S-VHS VCR HR-S4800U for S-VHS input from tape, with S cable to
the input device for card, I get no sound on preview and no sound on
captured video.

If I run a standard L - R audio out cable from the VCR and leave the S Cable
plugged in I get audio in the preview...which does not copy to the captured
video.

I tried running a video cable from the VCR with the L - R audio out cables
but I didn't
get a picture until I plugged in the S-VHS cable, too. Still no sound on the
capture.

Any suggestions would be appreciated...I can't make Pinnacle 9 work either.
 
I'm not an expert, but as I understand it, most capture cards will only
work(satisfactorily) with the software that came with them. For
example, I have a Pinnacle capture card which works fine with
PinnacleStudio9, but won't capture using Roxio Easy Media Creator 7.5
even though the card is recognized by that software.

Ken
 
i'm not an expert either!
--
i love films XX


Kenneth J. Harris said:
I'm not an expert, but as I understand it, most capture cards will only
work(satisfactorily) with the software that came with them. For
example, I have a Pinnacle capture card which works fine with
PinnacleStudio9, but won't capture using Roxio Easy Media Creator 7.5
even though the card is recognized by that software.

Ken
Click to expand...
 
Back
Top