mouse is dead after doing the...

  • Thread starter Thread starter AArDvarK
  • Start date Start date
A

AArDvarK

XP SP1a update. My mouse has completely died, so
have other USB plugs, with keyboard only I have no
way of rolling back to the previous state as the key-
board seems not to apply in "Add/Remove Programs".
I am stuck this way unless I format the XP installation
disc I suppose,

anything I can do? I am becoming quite "ept" with
keyboard now, that's cool!

Alex
 
AArDvarK said:
XP SP1a update. My mouse has completely died, so
have other USB plugs, with keyboard only I have no
way of rolling back to the previous state as the key-
board seems not to apply in "Add/Remove Programs".
I am stuck this way unless I format the XP installation
disc I suppose,

anything I can do? I am becoming quite "ept" with
keyboard now, that's cool!

Alex
Hmmm. Just for the fun of it, I tried Add & Remove Programs using just the
keyboard, and it worked fine.

Other than that, though, does your computer have PS2 or serial? You could
try a different style mouse.
 
True, I got a PS2 mouse.... I'll have to work on that
with keyboard and "Add/Remove Programs", thanks
for the suggestion.

Alex
 
AArDvarK said:
XP SP1a update. My mouse has completely died, so
have other USB plugs, with keyboard only I have no
way of rolling back to the previous state as the key-
board seems not to apply in "Add/Remove Programs".
I am stuck this way unless I format the XP installation
disc I suppose,

anything I can do? I am becoming quite "ept" with
keyboard now, that's cool!

Alex

ok bud i dont no if this will work but if you want two try this you can ok
do no rewrite ok wait do you have your resource cd you can run a test on
your hardware ok put disk in restart it will ask if you want two boot from
cd tap down button then enter be ready when it comes up take your time dont
rush ok click number 2 and then 1 ok you will see only 1 after the next
screen this will run 32 diagnostics test slow down and read the screen dont
run a full test one device at a time ok extended test ok you will see
keyboard ok run full test on key and mouse ok it is easy just slow down and
read all info you will see when you run your key test make sure it is your
keyboard ok look at top of screen it will tell you what keyboard you are on
ok you will know then ok go through all test read the bottom of screen click
yes when the test ask Y/N click y after a while you will see how easy it
really is remember hit each key one time this will test your keys and later
your mouse trust me if this doesnt help i will find out more info and help
you more later if you need two contact me this is jeff
(e-mail address removed) wait i have another idea ok do this it is very
easy ok go two my computer right click click propities tab on top click
hardware ok go two middle click device manager ok go down two mice and
other pointing devices click it will say update driver it will say hardware
update wizard try frist install software recommended if this does not work
wait try again ok click install from a list ok advance go two bottom look
for dont search i will choose the driver to install click the little circle
click next ok you will see your mouse on top and the a compatible mouse 2
ok click the 1 st it will move those folder for you ok you will see that you
can do this with all hardware ok bud . jeff (e-mail address removed)
 
Thank you for your effort Jeff, I fixed it
by removing XP SP1a, thank (above) it
didn't burn out the USB hardware!!

Alex
 
AArDvarK said:
XP SP1a update. My mouse has completely died, so
have other USB plugs, with keyboard only I have no
way of rolling back to the previous state as the key-
board seems not to apply in "Add/Remove Programs".
I am stuck this way unless I format the XP installation
disc I suppose,

anything I can do? I am becoming quite "ept" with
keyboard now, that's cool!

Alex

Use 'Tab' key until 'Change/Remove' is highlighted, press 'Enter'
 
Back
Top