Mother board

  • Thread starter Thread starter ghosthb20
  • Start date Start date
G

ghosthb20

Hi, I was searching online on how to fix a desktop problem that have.
I was able to find you guys and hope you guys could help. MY PROBLEM
IS THAT SOMEONE WHEN INTO BIOS AND TURN OFF THE OS. Now I turn on the
pc and nothing happens it just stays on. Nothing load up. Black screen
and the pc on. What could I do in this case. Thank you for you time.
 
Hi, I was searching online on how to fix a desktop problem that have.
I was able to find you guys and hope you guys could help. MY PROBLEM
IS THAT SOMEONE WHEN INTO BIOS AND TURN OFF THE OS. Now I turn on the
pc and nothing happens it just stays on. Nothing load up. Black screen
and the pc on. What could I do in this case. Thank you for you time.
Click to expand...

How do you turn off the OS?
You could try physically resetting the BIOS. There is probably a
jumper on the motherboard you move to different pins to reset it. Your
documentation should show it. Otherwise download manual from website.
 
ghosthb20 said:
Thanx a lot :D i'll try that
Click to expand...
It sounds like the boot sequence has been changed (excluding the HDD) or the
HDD controller has been turned off in BIOS. Just go into the BIOS and
carefully check all the options.

SteveH
 
ghosthb20 said:
Hi, I was searching online on how to fix a desktop problem that have.
I was able to find you guys and hope you guys could help. MY PROBLEM
IS THAT SOMEONE WHEN INTO BIOS AND TURN OFF THE OS. Now I turn on the
pc and nothing happens it just stays on. Nothing load up. Black screen
and the pc on. What could I do in this case. Thank you for you time.
Click to expand...
Kinda sounds like it is has nothing to do with the fact that someone
"went into the bios and turn off the os". If the screen is blank as soon
as you turn on the PC, then there is another issue underlying, be it a
hardware failure, loose card/ cable or a misconfigured BIOS. Even if the
boot sequence, or HDD parameters were changed, the POST should still
display when you turn on the PC (or the logo). If the boot sequence was
changed, then a message similar to "Missing Operating System" should appear.
Make sure all of your cards are seated correctly, and cables securely
attached. If that doesn't clear it up, clear out the CMOS by using the
jumpers or shorting the posts (BE CAREFUL). Check your documentation, it
will tell you how.
Post back here and let us know where your at with this.

Wheats
 
Hey guys thanx a lot. The jumper did work
and I'm up and running.

You guy are the best.thanx for all the help / also all the posted.
 
Hey guys thanx a lot. The jumper did work
and I'm up and running.

You guy are the best.thanx for all the help / also all the posted.
Click to expand...

Thanks for posting back to let us know it worked. The good thing is
you learned something new. That's how I learn to fix things -- break
them first.
 
On 18 May 2005 14:31:14 -0400,
I turn on the
pc and nothing happens it just stays on. Nothing load up. Black screen
and the pc on
Click to expand...

Could be a memory problem. Perhaps the memory stick was unseated. What
about the beeps? Your manual should give some indication regarding the
beeps and what error they signify.

Anyway remove the memory sticks and replace them properly and try
again.

HTH
 
Back
Top