D
Dave
MultiMedia Center 9.02
ATI All in Wonder Radeon
Changes: Installed version 9.02 from a product that was several years
old (4.xx).It worked at one time but I had not tried it since the
upgrade:
When I click the "Start recording" button on the control, the button
depresses, the TV display flickers once quickly and the button
immediately returns to the non depressed state. If I right click on
the button and select record for 1 minute, the flicker does not occur
and still no file is created.
A directory is created on the designated drive e:\ATI MMC\username but
there are not any files in the directory.
The FAQs indicate a problem when the software is installed on a FAT
drive and the files are being saved to an NTFS drive. All of my drives
are NTFS.
In the TV Setup Control the following are selected:
VGA Resolution
Disk Space: Always Record to Temporary Drive is checked
Temporary drive: E:\ 48GB Free
One Touch Record: Record for 00 days 00 hrs 01 mins
E:\ATI MMC
Style: User Defined VideoZZZ
When hovering over the Record (VCR) button the pop up displays "Start
Recording (Ctrl+R)>" and an animated mouse with the right button
blinking. This message never changes.
The Still Capture works fine.
My goal is to attach my VCR to the board and copy VHS tapes to disk
and then to DVD. First step is trying to record anything.
What might be causing the issue?
Thanks
ATI All in Wonder Radeon
Changes: Installed version 9.02 from a product that was several years
old (4.xx).It worked at one time but I had not tried it since the
upgrade:
When I click the "Start recording" button on the control, the button
depresses, the TV display flickers once quickly and the button
immediately returns to the non depressed state. If I right click on
the button and select record for 1 minute, the flicker does not occur
and still no file is created.
A directory is created on the designated drive e:\ATI MMC\username but
there are not any files in the directory.
The FAQs indicate a problem when the software is installed on a FAT
drive and the files are being saved to an NTFS drive. All of my drives
are NTFS.
In the TV Setup Control the following are selected:
VGA Resolution
Disk Space: Always Record to Temporary Drive is checked
Temporary drive: E:\ 48GB Free
One Touch Record: Record for 00 days 00 hrs 01 mins
E:\ATI MMC
Style: User Defined VideoZZZ
When hovering over the Record (VCR) button the pop up displays "Start
Recording (Ctrl+R)>" and an animated mouse with the right button
blinking. This message never changes.
The Still Capture works fine.
My goal is to attach my VCR to the board and copy VHS tapes to disk
and then to DVD. First step is trying to record anything.
What might be causing the issue?
Thanks