MM crashing

  • Thread starter Thread starter Florian Rosch
  • Start date Start date
F

Florian Rosch

Hi,
I have a problem here with the Movie Maker for WinXP Home. I'm adding a
movie and as soon as I want to add an effect, the program is crashing with
this error message: "unknown software exception (0xc0000fd)" at 0x77bfac08

It doesn't matter which movie I add, the problem occurs with every movie :-(

What can I do to avoid this error message and work with the MM??

Thanks for your help!
Florian
 
Hello there,

You sound as though you are suffering from a codec problem. There are two root
causes and below you will find the solution for each together with some notes
on other issues.

1)

The one stop solution for that is a program called Rename Codecs and it is
available from my web site (Free). Make sure you check out the FAQ, on the
site, on what it does and how to run it (That will take about one minute of
your time!!) All the info you need is on the web site.

This reassuringly safe to use program requires no knowledge on your part about
what it is doing or how it is doing it or what it is doing it too!!! neither do
you need to know where any of these files are or whether it is safe to rename
them or not.....and best of all, ITS FREE !!!

2)

If this does not solve your problem then try the following out...it has proved
to be a successful procedure for a variety of problems.

1) Download the full version of DirectX Ver 9.0b, Media Player 9 and Movie
Maker 2.

2) Reboot you computer and Install DirectX

3) Reboot again and install Windows Media Player 9

4) Reboot yet again and install Movie Maker 2

5) Reboot one more time

Yes it sounds very tedious, but if you want to be certain all file locks are
removed so that the correct files can be installed this is the way you have to
go.

It is very important that you only download the full versions of these programs
and that you DO NOT attempt an install over the internet.

Other Notes
===========
Graphics Acceleration
---------------------

There is advice floating around that you should disable the graphics
acceleration abilities of your graphics card if Movie Maker locks up or crashes
out. Doing this is roughly equivalent to taking out your current graphics card
and replacing it with one that is several years old....this is not the way
forward!

The Graphics card on the machine I edit on is a cut above the average, it has
DV In & Out as well as Video In & Out. It does all sorts of clever things and
it is extremely fast. Then the day came when I tried Movie Maker 2 for the
first time. It was a disaster. Knowing what the problem was I immediately
logged on to Microsoft and got the latest driver. There was no change with the
performance of the Graphics card with respect to Movie Maker. After a lot of
messing about I went to the cards manufacturer and downloaded there most recent
driver. I was convinced that the one from Microsoft was in some way defective.
It turned out that I was right but for the wrong reason.

The version of the driver from Microsoft was more recent than the one on my
system AND more recent than the one from the OEM.BUT, the OEM had made minor
changes to how the card worked and these were not taken into consideration by
the Microsoft update!!!

So, do not get the generic update from Microsoft until you have tried the
latest driver from the manufacturer of your card.

Registration
------------

There is in my view some very bad advice floating around that tells you to
unregister the offending codec. If you take this advise be warned that
unregistering any file and doing it wrong will more than likely stop the
program that file belongs to from working all together and may in an extreme
situation cause your entire XP system to fail. This is true whether you make a
mistake using the Registry editor or the registration program itself, one
mistake and you are potentially in deep trouble. Whatever you unregister in
this manner has to be restored and you should take note that the registration
of a codec can often involve more than one registry entry. If you are expert in
these matters you will have no problem.

I have also found that MP3, Mpeg and Jpeg files can cause problems, So...

Convert all MP3 to WAV

Convert all MPeg to AVI

Convert all Jpeg to BMP

Video Conversion
----------------

For Video Conversion you should also check out the Knowledge Base Section of my
"Great Links" One of the website's in there "Video Help" has the best
collection of useful information I have yet come across on converting between
the various formats together with links to the software needed.
 
Back
Top