Memtest86. 1 question about!

  • Thread starter Thread starter Mirko
  • Start date Start date
M

Mirko

Hello
do you know Memtest86 RAM's diagnostic software? Ok, and do you know also if
the programs says something like "Congratulations! Your RAM is tested
error-free!" if RAM's test gone ok? :-)
So, how can I make to notice that the test has gone good with Memtest? There
is any message on the screen?

Thank you so much
Mirko
 
Mirko said:
do you know Memtest86 RAM's diagnostic software? Ok, and do you know also if
the programs says something like "Congratulations! Your RAM is tested
error-free!" if RAM's test gone ok? :-)
So, how can I make to notice that the test has gone good with Memtest? There
is any message on the screen?
Click to expand...
Yes....No, it does not....No errors reported....No.
 
Look at the number of passes, if it's one or higher and no errors are listed your all set.
 
Mirko said:
Hello
do you know Memtest86 RAM's diagnostic software? Ok, and do you know
also if the programs says something like "Congratulations! Your RAM
is tested error-free!" if RAM's test gone ok? :-)
So, how can I make to notice that the test has gone good with
Memtest? There is any message on the screen?
Click to expand...


It does not display a message at all. The complete test is ran by pressing
"c" "2" "3" "Enter" after loading Memtest. This may take eight hours or more
to complete, with 512MB of RAM.
 
Look at the number of passes, if it's one or higher and no errors are listed your all set.
Click to expand...


Many times I've had to leave it running for several hours to catch memory
errors, or in worst, borderline cases, it passed for over a day but only
showed errors by raising memory bus a few MHz, which is a good second test
since there should be a margin for stability built into any system.
 
Back
Top