Memory voltage problem...

  • Thread starter Thread starter Calum
  • Start date Start date
C

Calum

Hello

I've been using 2 gigabytes of OCZ Platinum 6400 for a few months now
with no problems. Recently I was experiencing problems when loading
games so I ran memtest which discovered errors when reading and
writing from the RAM. The RAM is running at its rated timings of 4 4 4
15 1T at 2.1V.
I found that when I lowered the voltage to 2.0V the errors vanished.

Is this something I should be worried about as OCZ state that the
memory should support voltages up 2.2V

I would appreciate any advice

Thanks
 
In alt.comp.hardware.pc-homebuilt Calum said:
Hello

I've been using 2 gigabytes of OCZ Platinum 6400 for a few months now
with no problems. Recently I was experiencing problems when loading
games so I ran memtest which discovered errors when reading and
writing from the RAM. The RAM is running at its rated timings of 4 4 4
15 1T at 2.1V.
I found that when I lowered the voltage to 2.0V the errors vanished.

Is this something I should be worried about as OCZ state that the
memory should support voltages up 2.2V

I would appreciate any advice

Thanks
Click to expand...
Advice?
Run it at 2.0 volts.
 
: Hello
:
: I've been using 2 gigabytes of OCZ Platinum 6400 for a few months now
: with no problems. Recently I was experiencing problems when loading
: games so I ran memtest which discovered errors when reading and
: writing from the RAM. The RAM is running at its rated timings of 4 4 4
: 15 1T at 2.1V.
: I found that when I lowered the voltage to 2.0V the errors vanished.

Are they running hot at 2.1?
 
Back
Top