media center 9.13 did not find any channel signals !, yeap great 9.06 found 48 signals

  • Thread starter Thread starter rvn
  • Start date Start date
R

rvn

Hello,

\The new version of MMC can not find any channel signals ?
the old version, 9.06 fuond 48 channels !

Yeap, ATI drivers are a Tsunami of ergonomics !
( Matrox driver was always ' a peace of cake ")

Thank you for your help !,

Jeroen
 
rvn said:
Hello,

\The new version of MMC can not find any channel signals ?
the old version, 9.06 fuond 48 channels !

Yeap, ATI drivers are a Tsunami of ergonomics !
( Matrox driver was always ' a peace of cake ")

Thank you for your help !,

Jeroen
Click to expand...
9.13 certainly has its problems but haven't seen this before. Might have
something to do with where your located in the world.

I didn't really notice any improvements for just the AIW in 9.13 over 9.08.
If you want to work on fixing it posting the card, O/S and WDM driver
version would be helpful too. I went back to 9.08 because it kept crashing
when using the HDTV Wonder especially when using Multview. The most
compelling reason for me to use 9.13.
I'm used to it but most people don't like the TVoD being on constantly. The
recording resolution is low too.

Why did you quit using the Matrox? (just kidding :)
 
Hey Shadow !,

Thank you for your reply !

The Card: ATI X-800-XT all in Wonder
OS: XP Pro SP2
WDM driver: 6.14.10.63.12

and its PAL+-B , I 'm living in the Netherlands.

And its not possible to enter the channels manually
in regedit ?

Thank You again, bye !
Jeroen

----- Original Message -----
From: "T Shadow" <[email protected]>
Newsgroups: alt.comp.periphs.videocards.ati
Sent: Wednesday, April 19, 2006 6:57 PM
Subject: Re: media center 9.13 did not find any channel signals !, yeap
great 9.06 found 48 signals
 
rvn said:
Hey Shadow !,

Thank you for your reply !

The Card: ATI X-800-XT all in Wonder
OS: XP Pro SP2
WDM driver: 6.14.10.63.12

and its PAL+-B , I 'm living in the Netherlands.

And its not possible to enter the channels manually
in regedit ?

Thank You again, bye !
Jeroen

----- Original Message -----
From: "T Shadow" <[email protected]>
Newsgroups: alt.comp.periphs.videocards.ati
Sent: Wednesday, April 19, 2006 6:57 PM
Subject: Re: media center 9.13 did not find any channel signals !, yeap
great 9.06 found 48 signals
Click to expand...
I was afraid it was going to be PAL. Use NTSC/ATSC here. Doubt it'll help
you but I put a couple of ATSC channels into the channel list in the TV apps
Control Panel recently. Antenna won't pick them up pointed in the same
directions as the other stations. Might try that if available.
Hopefully someone in your area will respond.
If no one has a better idea you might try another install. Run the
CatUninstaller first. Install the WDM drivers before the display driver per
the WDM driver release notes then install MMC in the order they appear on
that page. RW is last and drivers have to be installed before attaching
hardware.
Good Luck
 
Back
Top