maxtor 3000XT firewire disc startup problem

  • Thread starter Thread starter gbgkille69
  • Start date Start date
G

gbgkille69

Hello,

I have an external maxtor firewire disc connected to my PC and at
startup of the system it takes longer and longer until the drive gets
ready, i.e. the red led dissapears and the drive icon appears on my
system. The disc contains roughly 55 GB of data, manly dvd single
layer data, i.e. the average file size is around 1GB.
all drivers are up to date according to windows update and the drive
does not report any malfunctions. what can I do?
 
Do not power-on the Maxtor drive until your system
has booted to the desktop. Power-off the Maxtor
before turning-off your PC.

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| Hello,
|
| I have an external maxtor firewire disc connected to my PC and at
| startup of the system it takes longer and longer until the drive gets
| ready, i.e. the red led dissapears and the drive icon appears on my
| system. The disc contains roughly 55 GB of data, manly dvd single
| layer data, i.e. the average file size is around 1GB.
| all drivers are up to date according to windows update and the drive
| does not report any malfunctions. what can I do?
 
Thanks for the answer, that is of course not very user friendly, (and
it worked fine before), I use this disc as a "permanent" 2nd disc and
also for backup. I want to start the entire system with one button
only. Is the same recommended for external USB drives too or only for
firewire? what is the reasons for this "behaviour"?
 
I've just tried it and the result is the same. even if I connect the
drive after windows is up it will take 5-10 minutes until it is ready
for windows to recognise.

another thing, there is no power on/off button on the device which
makes this approach evene more difficult.

(e-mail address removed) skrev:
 
Back
Top