Maximum Safe Temperature for AMD Tbird 2600+?

  • Thread starter Thread starter Steven
  • Start date Start date
S

Steven

Hello,

I have a Soyo KT400 Dragon Lite and it keeps shutting off. The mobo
automatically shuts down when it thinks the cpu temp is greater than
85 degress celcius. So I just upped it to 90 degrees celcius. I hope
it doesn't get so hot that it stops working. I have looked on AMD
website and I've done searches on Google with no luck. I want to know
what the highest safe temperature I can run my AMD 2600+ at?

Steven
 
Steven said:
Hello,

I have a Soyo KT400 Dragon Lite and it keeps shutting off. The mobo
automatically shuts down when it thinks the cpu temp is greater than
85 degress celcius. So I just upped it to 90 degrees celcius. I hope
it doesn't get so hot that it stops working. I have looked on AMD
website and I've done searches on Google with no luck. I want to know
what the highest safe temperature I can run my AMD 2600+ at?

Steven

85'C is right on the line.

Hopefully your CPU is not actually running at those temps
and instead you merely have a temperature measurement
problem.

And have you checked to the most obvious suspect - a
dead cpu fan ? Most people can tell when this happens
just by the change in the noise their system makes, but
people with bad hearing - me - need to open the case and look.

As well, if your system was put together using a thermal
paste between the cpu instead of a thermal pad, it might
be time to refresh the paste. Remove the heatsink, wipe
the old paste off of the heatsink and cpu, and apply
fresh paste. There is (was ?) an instructional video at
the Artic Silver site - its been at least two years since
I looked.
 
Hi Rob, thank you so much for your response. Actually I have been
running my computer with the case off and I can see the fan spinning.
I even ran my finger across it to make sure it works and it does. The
fan I bought is one of those models designed to make very little
noise, it has a limiter of something like 40,000rpm or something so it
revolves a little slower than your standard "run-of-the-mill" cpu
cooling fan. Hence, it may be the fan itself that is the culprit. No
matter, I'm not buying a new fan (unless I know I can get results),
because computer noise to me is a top priority. I specifically
targeted my Nexxus fan because of it's low 35 dB output. Funny thing,
whenever I go into Staples or Office Max and listen to the systems on
display (HP, Compaq, Sony, etc) they are all real silent. I remember
back 2 yrs ago, way before the Pentium 4 came out. There were systems
out there that were literally "silent". Gosh I wish I had one of those
systems. Maybe it's time for a store bought computer.
 
Steven said:
Hi Rob, thank you so much for your response. Actually I have been
running my computer with the case off and I can see the fan spinning.
I even ran my finger across it to make sure it works and it does. The
fan I bought is one of those models designed to make very little
noise, it has a limiter of something like 40,000rpm

Surely you mean 4,000 !
or something so it
revolves a little slower than your standard "run-of-the-mill" cpu
cooling fan. Hence, it may be the fan itself that is the culprit. No
matter, I'm not buying a new fan (unless I know I can get results),
because computer noise to me is a top priority. I specifically
targeted my Nexxus fan because of it's low 35 dB output. Funny thing,
whenever I go into Staples or Office Max and listen to the systems on
display (HP, Compaq, Sony, etc) they are all real silent.

Keep in mind that those demo systems are sitting there doing
nothing much. They are often running at just a few percent
of the CPU capability - so the fans get throttled back. Get
a salesman to enter the password for you so you can do something
a little more demanding and you will hear the fans spin up to
a more familiar level.

However, the big brand machines are often a little better
engineered and assembled. Even just tidying the cables
up so they aren't fluttering in the airstream can make a
noticeable difference in noise levels.

I remember
back 2 yrs ago, way before the Pentium 4 came out. There were systems
out there that were literally "silent". Gosh I wish I had one of those
systems. Maybe it's time for a store bought computer.

I switched someone over a while ago from a regular Athlon XP2400+
with the stock heat sink and fan to a 1.45 volt mobile Athlon 2600+
using a Zalman flower cooler. No fans left in that system except in
the PSU. Nothing else making noise in there but the DVD drive and
the hard drives. The cpu runs at 63'C under load - undoubtedly helped
a great deal by being able to run at only 1.45 V. He is currently
debating whether or not he wants to spend a little more to get a
fanless PSU.
 
Back
Top