Master/Slave and cooling

  • Thread starter Thread starter Howard Kaikow
  • Start date Start date
H

Howard Kaikow

Currently, system has:

CD-RW on Primary controller as, I believe, Master.
No Slave on Primary controller.

ZIP on Secondary controller as, I believe, Slave.
No Master on Secondary controller.

I was thinking of putting both drives on one controller, with CD-RW as
Master and ZIP as Slave.

Removing 1 cable should help air flow, n'est-ce pas?

If so to which controller should they be moved?
And, does it matter in which order they are connected to the cable, if both
are correcly jumpered?
 
Howard Kaikow said:
Currently, system has:
Click to expand...
CD-RW on Primary controller as, I believe, Master.
No Slave on Primary controller.
Click to expand...
ZIP on Secondary controller as, I believe, Slave.
No Master on Secondary controller.
Click to expand...
I was thinking of putting both drives on one controller,
with CD-RW as Master and ZIP as Slave.
Click to expand...
Removing 1 cable should help air flow, n'est-ce pas?
Click to expand...

Its unlikely to make any difference in practice.
If so to which controller should they be moved?
Click to expand...

Doesnt really matter, but its more usual to use the primary.
And, does it matter in which order they are connected
to the cable, if both are correcly jumpered?
Click to expand...

No, not unless you use cable select jumpering in which
case the order determines the master and slave.
 
Thanx.

I may do it just to reduce the cables.
Airflow would have to improve, maybe by not much.
 
Back
Top